NSN 5306-00-138-6384
Close Tolerance Hex Head Bolt
Detent ring in shank.
Manufacturer part number 106467-3-15 for national stock number 5306001386384.
Datasheet
-
Product description
Close Tolerance Bolt NSN 5306-00-138-6384.
-
MPN or Model
106467-3-15
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.236 inches and 0.318 inches -
Fastener Length
Between 1.310 inches and 1.330 inches -
Head Style
Dished hexagon -
Head Height
Between 0.095 inches and 0.110 inches -
Width Between Flats
Between 0.367 inches and 0.376 inches -
Grip Diameter
Between 0.1885 inches and 0.1894 inches -
Shank Unthreaded Hole Diameter
0.070 inches all holes and 0.080 inches all holes -
Thread Diameter
0.190 inches -
Grip Length
Between 0.938 inches and 0.954 inches -
Thready Qty Per Inch (tpi)
32 -
Hardness Rating
36.0 rockwell c and 41.0 rockwell c -
Distance From Head Largest Bearing Surface To Shank Hole Center
1.217 inches all holes and 1.247 inches all holes -
Surface Finish
63.0 microinches grip -
Material
Steel comp e4340 or steel comp 4340 or steel comp 4140 or steel comp 8740 or steel comp 4130 or steel comp 6150 -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416, type 2, class 2 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-536-6822 MPN CA2658-5-20Close Tolerance Screw
- 5305-00-908-5205 MPN CA28080-4-6HSPanel Screw Assembly
- 5305-01-088-1968 MPN CA21089-4-4HSSocket Head Cap Screw
- 5305-01-089-3689 MPN CA11020-0804-11SPanel Screw Assembly
- 5305-01-136-6913 MPN CA13170-3-3-9FSKExternally Relieved Body Screw
- 5305-01-292-8360 MPN CA28080-3-12PPanel Screw Assembly
- 5305-01-398-6543 MPN CA21063-06-4-10Machine Screw
- 5305-01-518-9959 MPN CA2292-10-17-17Panel Screw Assembly
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.
Pricing and Availability
Get a quote for 5306-00-138-6384 close tolerance boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
106467-3-15 | Sps Technologies, Llc |
AS194-3-15 | Avibank Mfg., Inc. |
MS27576-3-15 | National Aerospace Standards |
MS27576-3-15 | Military Standards |
CA4510-3-15 | Arconic Global Fasteners & Rings, |