NSN 5306-00-964-0121
Coaxial Connector
0.606 inches fastener length, double hexagon head style, 0.164 inches head height, width between flats: between 0.430 inches and 0.439 inches .
Manufacturer part number EWSB930-4-5 for national stock number 5306009640121.
Datasheet
-
Product description
Shear Bolt NSN 5306-00-964-0121.
-
MPN or Model
EWSB930-4-5
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.293 inches -
Fastener Length
0.606 inches -
Head Style
Double hexagon -
Head Height
0.164 inches -
Width Between Flats
Between 0.430 inches and 0.439 inches -
Grip Diameter
Between 0.2483 inches and 0.2492 inches -
Thread Diameter
0.250 inches -
Grip Length
0.313 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
300000 pounds per square inch -
Hardness Rating
55.0 rockwell c and 58.0 rockwell c -
Material
Steel -
Material Specification
Sps-m-166, fscm 03680 mfr ref single material response -
Surface Treatment
Nickel and cadmium -
Surface Treatment Specification
Ams 2416 assn standard all treatment responses -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-331-4778 MPN 965812-309CMachine Screw
- 5305-01-054-6270 MPN AIC985-4-6PClose Tolerance Screw
- 5305-01-168-3903 MPN AIC4040E4-04RClose Tolerance Screw
- 5305-01-270-1236 MPN LE111-0032-2432Machine Screw
- 5305-01-296-7823 MPN AIC4034V4-08Close Tolerance Screw
- 5305-01-322-8717 MPN 720210-90Hexagon Head Cap Screw
- 5305-01-435-5363 MPN BACB30LU8-18Close Tolerance Screw
- 5305-01-444-2398 MPN HT4020-4-9AClose Tolerance Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-00-964-0121 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
EWSB930-4-5 | Sps Technologies, Llc |
VS2767-4C5 | Alcoa Global Fasteners, Inc. |
AIC930-4-5 | Sps Technologies, Llc |
C078-4-5 | Lockheed Martin Corporation |