NSN 5306-01-040-4699
Coaxial Connector
Between 0.785 inches and 0.815 inches fastener length, dished hexagon head style, between 0.125 inches and 0.140 inches head height, width between flats: between 0.430 inches and 0.439 inches .
Manufacturer part number BACB30LM4-6 for national stock number 5306010404699.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-040-4699.
-
MPN or Model
BACB30LM4-6
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.400 inches and 0.450 inches -
Fastener Length
Between 0.785 inches and 0.815 inches -
Head Style
Dished hexagon -
Head Height
Between 0.125 inches and 0.140 inches -
Width Between Flats
Between 0.430 inches and 0.439 inches -
Grip Diameter
Between 0.2485 inches and 0.2495 inches -
Thread Diameter
0.250 inches -
Grip Length
Between 0.365 inches and 0.385 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Material
Iron alloy 660 -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416, type 2, class 3 federal specification single treatment response -
Thread Series Designator
Unjf -
Specification Data
81205-bacb30lm professional/industrial association standard
More from these suppliers
- 5305-01-131-7559 MPN ST3M714-6-13Close Tolerance Screw
- 5305-01-143-6536 MPN ST3M653C5-14AShoulder Screw
- 5305-01-158-5368 MPN SC2671-06-6Machine Screw
- 5305-01-435-8525 MPN BACB30LU9-46Close Tolerance Screw
- 5306-00-205-3700 MPN BACB30MF6-18Close Tolerance Bolt
- 5306-01-131-2908 MPN VDP0002-3Assembled Washer Bolt
- 5306-01-143-2812 MPN VAL23608-4-77Shoulder Bolt
- 5306-01-180-6607 MPN LD111-0020-0418Shear Bolt
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-040-4699 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
BACB30LM4-6 | The Boeing Company |
BACB30LM4-6 | Boeing Defence Australia Ltd |
BACB30LM4-6 | Boeing Defence Australia Ltd |
BACB30LM4-6 | Sps Technologies, Llc |
BACB30LM4-6 | Valley-todeco, Inc. |
BACB30LM4-6 | Arconic Global Fasteners & Rings, |
BACB30LM4-6 | Federal Manufacturing Corporation |
BACB30LM4-6 | Huck International, Inc. |
BACB30LM4-6 | Sps Technologies, Llc |
BACB30LM4-6 | Sps Technologies, Llc |
BACB30LM4-6 | Voi-shan/chatsworth |
BACB30LM4-6 | Huck Intl Inc |