NSN 5306-01-066-0779
Close Tolerance Hex Head Bolt
Between 2.437 inches and 2.457 inches fastener length, double hexagon head style, 0.210 inches head height, width between flats: between 0.553 inches and 0.564 inches .
Manufacturer part number 121933-6-32 for national stock number 5306010660779.
Datasheet
-
Product description
Close Tolerance Bolt NSN 5306-01-066-0779.
-
MPN or Model
121933-6-32
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.447 inches -
Fastener Length
Between 2.437 inches and 2.457 inches -
Head Style
Double hexagon -
Head Height
0.210 inches -
Width Between Flats
Between 0.553 inches and 0.564 inches -
Grip Diameter
Between 0.3740 inches and 0.3745 inches -
Shank Unthreaded Hole Diameter
0.106 inches first hole and 0.111 inches first hole -
Thread Diameter
0.375 inches -
Grip Length
Between 1.990 inches and 2.010 inches -
Thready Qty Per Inch (tpi)
24 -
Distance From Head Largest Bearing Surface To Shank Hole Center
2.303 inches first hole and 2.323 inches first hole -
Material
Stainless steel -
Material Specification
Ams5629 assn standard single material response -
Surface Treatment
Passivate -
Thread Series Designator
Unjf
More from these suppliers
- 1680-01-242-9655 MPN 200778-6Port End Extension
- 5305-00-354-6063 MPN HT4024L3D2Close Tolerance Screw
- 5305-00-364-9540 MPN HT4025L3-13Close Tolerance Screw
- 5305-00-492-3007 MPN DFP79S10B5Special Screw
- 5305-00-541-9045 MPN NAS1221-3-2Machine Screw
- 5305-01-014-6151 MPN S5008-3-7Close Tolerance Screw
- 5305-01-023-8192 MPN NAS1191-04T3BSocket Head Cap Screw
- 5305-01-030-4902 MPN HT4020-3-5Close Tolerance Screw
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.
Pricing and Availability
Get a quote for 5306-01-066-0779 close tolerance boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
121933-6-32 | Huck International, Inc. |
ST3M750-6-32 | Sps Technologies, Llc |
121933-6-32 | Huck Intl Inc |