NSN 5306-01-222-3289
Coaxial Connector
Between 2.255 inches and 2.302 inches fastener length, double hexagon head style, 0.539 inches head height, width between flats: between 1.427 inches and 1.440 inches .
Manufacturer part number 123WM40022-611 for national stock number 5306012223289.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-222-3289.
-
MPN or Model
123WM40022-611
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.2 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 1.120 inches and 1.187 inches -
Fastener Length
Between 2.255 inches and 2.302 inches -
Head Style
Double hexagon -
Head Height
0.539 inches -
Width Between Flats
Between 1.427 inches and 1.440 inches -
Grip Diameter
Between 0.9980 inches and 0.9990 inches -
Thread Diameter
0.625 inches -
Grip Length
Between 1.115 inches and 1.135 inches -
Thready Qty Per Inch (tpi)
18 -
Min. Tensile Strength (psi)
220000 pounds per square inch -
Hardness Rating
46.0 rockwell c and 50.0 rockwell c -
Material
Steel comp h11 -
Material Specification
Ams6487 assn standard single material response -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416, type 2, class 2 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 1680-01-417-3471 MPN BACB30LM3D34Bolt Aircraft Hinge
- 5305-00-508-5041 MPN LS15267V3-32Machine Screw
- 5305-00-638-8677 MPN BACB30LH3U19Machine Screw
- 5305-01-176-8175 MPN LD111-0044-2306Close Tolerance Screw
- 5305-01-203-1665 MPN BACB30LU3-16Close Tolerance Screw
- 5305-01-501-4781 MPN 3M1170C3-14AClose Tolerance Screw
- 5305-01-512-8411 MPN 3M1170D3-5AFClose Tolerance Screw
- 5306-00-848-6427 MPN R105P8NExternally Relieved Body Bolt
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-222-3289 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
123WM40022-611 | Northrop Grumman Systems Corporation |
GB511B16-18 | Northrop Grumman Systems Corporation |
VS3440-16F18 | Arconic Global Fasteners & Rings, |
VAL22034-1618 | Valley-todeco, Inc. |
AIC516B16-18 | Sps Technologies, Llc |
BM17020-16-18 | Huck International, Inc. |
PBF107816-18 | Sps Technologies, Llc |
84441D16-18 | Sps Technologies, Llc |
MB182JK-1618 | Hi-shear Corporation |
123WM40022-611 | Northrop Grumman Systems Corporation |