NSN 5306-01-286-8472
Close Tolerance Hex Head Bolt
Between 3.521 inches and 3.568 inches fastener length, spline drive shear head head style, 0.328 inches head height, grip diameter: between 0.5610 inches and 0.5615 inches .
Manufacturer part number VCG0002-9D45 for national stock number 5306012868472.
Datasheet
-
Product description
Close Tolerance Bolt NSN 5306-01-286-8472.
-
MPN or Model
VCG0002-9D45
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.3 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.725 inches -
Fastener Length
Between 3.521 inches and 3.568 inches -
Head Style
Spline drive shear head -
Head Height
0.328 inches -
Grip Diameter
Between 0.5610 inches and 0.5615 inches -
Shank Unthreaded Hole Diameter
0.141 inches first hole and 0.146 inches first hole -
Head Minor Diameter
0.908 inches -
Thread Diameter
0.562 inches -
Grip Length
Between 2.802 inches and 2.822 inches -
Thready Qty Per Inch (tpi)
18 -
Distance From Head Largest Bearing Surface To Shank Hole Center
3.413 inches first hole -
Material
Steel comp xm-13 -
Material Specification
Ams 5629 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-680-5889 MPN BACB30LU-4D-35Machine Screw
- 5305-01-364-8276 MPN BACS12FA3K5Machine Screw
- 5305-01-435-3458 MPN BACB30LU7-22Close Tolerance Screw
- 5305-01-505-3997 MPN TX1024C3-2-7AClose Tolerance Screw
- 5306-00-061-3008 MPN BACB30MT-8-13Machine Bolt
- 5306-00-135-1056 MPN VFK100G-05030Shear Bolt
- 5306-01-040-3362 MPN BACB30LJ6DU17Close Tolerance Bolt
- 5306-01-045-6557 MPN VAL23608-4-32Shoulder Bolt
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.
Pricing and Availability
Get a quote for 5306-01-286-8472 close tolerance boltManufacturer Part Numbers and Alternates
| MPN manufacturer part number | Registrant or Supplier |
|---|---|
| VCG0002-9D45 | Valley-todeco, Inc. |
| AIC688-9D45 | Sps Technologies, Llc |
| PBF 1266-9D45 | Sps Technologies, Llc |
| MB155-9D45 | Hi-shear Corporation |
| 122896-9D45 | Sps Technologies, Llc |
| VS3191-9D45 | Arconic Global Fasteners & Rings, |
| S397-9D45 | Huck International, Inc. |
| MB155-9D45 | Lisi Aerospace Canada Corp |
| VS3191-9D45 | Alcoa Global Fasteners, Inc. |
| ST3M747-9D45 | Heartland Precision Fasteners, Inc. |
| ST3M747-9D45 | Huck International, Inc. |
| ST3M747-9D45 | P.s. Machine Company, Inc. |
| ST3M747-9D45 | Fastener Innovation Technology, Inc. |
| ST3M747-9D45 | Boeing Company, The |
| ST3M747-9D45 | Sps Technologies Inc |
| S397-9D45 | Huck Intl Inc |
| 10116202 | Nimikkeistokeskus Ncb Finland |
Stock Check
