NSN 5306-01-341-8918
Coaxial Connector
Between 1.695 inches and 1.725 inches fastener length, spline drive shear head head style, 0.164 inches head height, grip diameter: between 0.2485 inches and 0.2495 inches .
Manufacturer part number 84269-4-21 for national stock number 5306013418918.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-341-8918.
-
MPN or Model
84269-4-21
-
Schedule B
7508.90.0000 (Other articles of nickel, nesoi (excluding cloth, grill & netting of nickel wire)) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.397 inches -
Fastener Length
Between 1.695 inches and 1.725 inches -
Head Style
Spline drive shear head -
Head Height
0.164 inches -
Grip Diameter
Between 0.2485 inches and 0.2495 inches -
Head Minor Diameter
0.447 inches -
Thread Diameter
0.250 inches -
Grip Length
Between 1.303 inches and 1.323 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
180000 pounds per square inch -
Surface Finish
32.0 microinches grip -
Material
Nickel alloy 718 -
Material Specification
Ams 5662 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-01-047-1002 MPN BACB30LU5-19Close Tolerance Screw
- 5305-01-054-2535 MPN BACB30LK06-4Close Tolerance Screw
- 5305-01-435-6313 MPN BACB30LU9-21Close Tolerance Screw
- 5305-01-435-9819 MPN BACB30LU5P11YClose Tolerance Screw
- 5305-01-495-9270 MPN 3M1170D4D7AClose Tolerance Screw
- 5305-01-512-8414 MPN 3M1170D3-7AFClose Tolerance Screw
- 5305-01-626-0694 MPN ST3M557-7-27Close Tolerance Screw
- 5306-00-150-4890 MPN VAL23611-6D026Close Tolerance Bolt
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-341-8918 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
84269-4-21 | Sps Technologies, Llc |
VCJ0002-4-21 | Valley-todeco, Inc. |
AIC1237-4-21 | Sps Technologies, Llc |
PBF1542-4-21 | Sps Technologies, Llc |
3D0029-4-21 | Boeing Company, The |
1237-4-21 | Sps Technologies, Llc |