NSN 5306-01-501-6968
Coaxial Connector
0.995 inches fastener length, spline drive shear head head style, 0.164 inches head height, grip diameter: between 0.248 inches and 0.249 inches .
Manufacturer part number VCG0009-4-10R for national stock number 5306015016968.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-501-6968.
-
MPN or Model
VCG0009-4-10R
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.370 inches -
Fastener Length
0.995 inches -
Head Style
Spline drive shear head -
Head Height
0.164 inches -
Grip Diameter
Between 0.248 inches and 0.249 inches -
Single Shear Strength
13000 pounds per square inch -
Head Minor Diameter
0.531 inches -
Thread Diameter
0.250 inches -
Grip Length
0.625 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
6980 pounds per square inch -
Material
Steel -
Material Specification
Ams6487 assn standard single material response -
Surface Treatment
Cadmium -
Surface Treatment Specification
A5672 assn standard 11th treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-508-2707 MPN LS15266V3-15Close Tolerance Screw
- 5305-01-512-8364 MPN 3M1170D4-18AClose Tolerance Screw
- 5305-01-642-4869 MPN BACS12CK04-4Machine Screw
- 5306-00-357-1728 MPN VAL23029-3D67Close Tolerance Bolt
- 5306-00-931-2801 MPN GB511B5-18Shear Bolt
- 5306-01-054-3410 MPN C7521-5-12Shear Bolt
- 5306-01-054-3422 MPN C7521L6-19Shear Bolt
- 5306-01-131-8164 MPN BACB30LJHU15Shear Bolt
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
![Mechanic Bill explains Coaxial Connector](/public/images/billy-thinking.png)
Pricing and Availability
Get a quote for 5306-01-501-6968 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
VCG0009-4-10R | Valley-todeco, Inc. |
AIC596-4-10R | Sps Technologies, Llc |
H411-4-10R | Huck International, Inc. |
PBF7521-4-10R | Sps Technologies, Llc |
120978-4-10R | Sps Technologies, Llc |
VS3133-4-10R | Tactair Fluid Controls, Inc. |
120978-4-10R | Sps Technologies, Llc |
C7521-4-10R | Lockheed Martin Corporation |
Stock Check
![](/public/images/partscage_shelf3.png)