NSN 5306-01-331-1254
Coaxial Connector
Between 1.102 inches and 1.132 inches fastener length, spline extended washer head style, between 0.195 inches and 0.215 inches head height, extended washer diameter: between 0.349 inches and 0.359 inches .
Manufacturer part number AIC1654-3-12 for national stock number 5306013311254.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-331-1254.
-
MPN or Model
AIC1654-3-12
-
Schedule B
7508.90.0000 (Other articles of nickel, nesoi (excluding cloth, grill & netting of nickel wire)) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.367 inches -
Fastener Length
Between 1.102 inches and 1.132 inches -
Head Style
Spline extended washer -
Head Height
Between 0.195 inches and 0.215 inches -
Extended Washer Diameter
Between 0.349 inches and 0.359 inches -
Extended Washer Thickness
Between 0.017 inches and 0.037 inches -
Grip Diameter
Between 0.1885 inches and 0.1895 inches -
Head Minor Diameter
0.253 inches -
Thread Diameter
0.190 inches -
Grip Length
Between 0.740 inches and 0.760 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
220000 pounds per square inch -
Surface Finish
32.0 microinches threads -
Material
Nickel alloy 718 -
Material Specification
Ams5662 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-505-2707 MPN LS15266V4-7Close Tolerance Screw
- 5305-01-133-9447 MPN ST3M454-4DL10Close Tolerance Screw
- 5305-01-412-7540 MPN VCL009-4-22Close Tolerance Screw
- 5306-00-040-9749 MPN VFK100G-06052Shear Bolt
- 5306-01-054-3409 MPN C7521-5-10Shear Bolt
- 5306-01-086-1079 MPN BACB30LM3U3Shear Bolt
- 5306-01-206-7228 MPN BACB30LM10DU36Shear Bolt
- 5306-01-333-8818 MPN VAL23001-6D039Shear Bolt
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-331-1254 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
AIC1654-3-12 | Sps Technologies, Llc |
PBF1421-3-12 | Sps Technologies, Llc |
SII1182-3-12 | Sonic Industries Inc. |
123710-3-12 | Sps Technologies, Llc |
MB210-3-12 | Hi-shear Corporation |
VS3318-3-12 | Alcoa Global Fasteners, Inc. |
VCG0016-3-12 | Valley-todeco, Inc. |
SLB187-3-12 | Space-lok, Inc. |
X384-3-12 | Huck International, Inc. |
DF33004-3-12 | Huck International, Inc. |
03A099-3-12 | Northrop Grumman Systems Corporation |
MB210-3-12 | Lisi Aerospace Canada Corp |
VS3318-3-12 | Voi-shan/chatsworth |
X384-3-12 | Huck Intl Inc |
DF33004-3-12 | Huck Intl Inc |