NSN 5306-01-336-6319
Close Tolerance Hex Head Bolt
Dry film lube on bearing surface of head:hole drilled in shank,0.106 in. Dia x 0.498/0.499 in. Nom deep.
Manufacturer part number AIC596-8DN24 for national stock number 5306013366319.
Datasheet
-
Product description
Close Tolerance Bolt NSN 5306-01-336-6319.
-
MPN or Model
AIC596-8DN24
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.528 inches -
Fastener Length
Between 2.013 inches and 2.043 inches -
Head Style
Spline drive shear head -
Head Height
0.281 inches -
Grip Diameter
Between 0.498 inches and 0.499 inches -
Head Minor Diameter
0.901 inches -
End Application
Pacer dawn -
Thread Diameter
0.5000 inches -
Grip Length
Between 1.490 inches and 1.510 inches -
Thready Qty Per Inch (tpi)
20 -
Material
Steel comp h11 -
Material Specification
Ams-6487 assn standard single material response -
Surface Treatment
Cadmium -
Surface Treatment Specification
Nas672 national specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-216-3190 MPN 40-48-10R11Machine Screw
- 5305-01-386-1539 MPN VCL0009-3-7Machine Screw
- 5305-01-435-6292 MPN BACB30LU9-18Close Tolerance Screw
- 5305-01-462-2873 MPN 3M1169V5-10AClose Tolerance Screw
- 5306-00-040-9749 MPN VFK100G-06052Shear Bolt
- 5306-01-054-3421 MPN VCG0009L6-18Shear Bolt
- 5306-01-059-6701 MPN VFK100G-10050Shear Bolt
- 5306-01-118-1187 MPN STSBG003A04U017Close Tolerance Bolt
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.
Pricing and Availability
Get a quote for 5306-01-336-6319 close tolerance boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
AIC596-8DN24 | Sps Technologies, Llc |
VCG0030-8DN24 | Valley-todeco, Inc. |
PBF7521-8DN24 | Sps Technologies, Llc |
120978-8-D24N | Sps Technologies, Llc |
VS3133-8DN24 | Alcoa Global Fasteners, Inc. |
H411-8DN24 | Huck Intl Inc |
5306-002-8DN24 | Aidc/aerospace Industrialdevelopment |
H411-8DN24 | Huck International, Inc. |