NSN 5306-01-342-2709
Coaxial Connector
Between 1.692 inches and 1.739 inches fastener length, double hexagon head style, between 0.247 inches and 0.267 inches head height, width between flats: between 0.678 inches and 0.689 inches .
Manufacturer part number PBF1479-7-18A for national stock number 5306013422709.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-342-2709.
-
MPN or Model
PBF1479-7-18A
-
Schedule B
7508.90.0000 (Other articles of nickel, nesoi (excluding cloth, grill & netting of nickel wire)) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.583 inches -
Fastener Length
Between 1.692 inches and 1.739 inches -
Head Style
Double hexagon -
Head Height
Between 0.247 inches and 0.267 inches -
Width Between Flats
Between 0.678 inches and 0.689 inches -
Grip Diameter
Between 0.4365 inches and 0.4370 inches -
Thread Diameter
0.438 inches -
Grip Length
1.125 inches -
Thready Qty Per Inch (tpi)
20 -
Min. Tensile Strength (psi)
220000 pounds per square inch -
Material
Nickel alloy 718 -
Material Specification
Ams 5662 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-01-056-5451 MPN BACB30LK3-8Close Tolerance Screw
- 5305-01-386-2540 MPN VCL0009-3-14Machine Screw
- 5305-01-414-4188 MPN VCL0009-7-32Close Tolerance Screw
- 5305-01-435-6369 MPN BACB30LU9-23Close Tolerance Screw
- 5305-01-462-2667 MPN 3M1034C6-13-51Close Tolerance Screw
- 5305-01-512-8368 MPN 3M1170D4-4AClose Tolerance Screw
- 5305-01-512-8411 MPN 3M1170C3-5AFClose Tolerance Screw
- 5306-00-131-7216 MPN MS21250-06034Shear Bolt
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-342-2709 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
PBF1479-7-18A | Sps Technologies, Llc |
VCD0020-7-18A | Valley-todeco, Inc. |
92147-7-18A | Sps Technologies, Llc |
GB511GG7-18A | Northrop Grumman Systems Corporation |