NSN 5306-01-344-6718
Coaxial Connector
Between 1.995 inches and 2.042 inches fastener length, double hexagon head style, between 0.340 inches and 0.360 inches head height, width between flats: between 0.928 inches and 0.940 inches .
Manufacturer part number VCD0020-10-20 for national stock number 5306013446718.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-344-6718.
-
MPN or Model
VCD0020-10-20
-
Schedule B
7508.90.0000 (Other articles of nickel, nesoi (excluding cloth, grill & netting of nickel wire)) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.761 inches -
Fastener Length
Between 1.995 inches and 2.042 inches -
Head Style
Double hexagon -
Head Height
Between 0.340 inches and 0.360 inches -
Width Between Flats
Between 0.928 inches and 0.940 inches -
Grip Diameter
Between 0.6235 inches and 0.6240 inches -
Thread Diameter
0.625 inches -
Grip Length
1.250 inches -
Thready Qty Per Inch (tpi)
18 -
Min. Tensile Strength (psi)
220000 pounds per square inch -
Surface Finish
32.0 microinches grip -
Material
Nickel alloy 718 -
Material Specification
Ams 5662 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-364-9543 MPN ST3M454-3L6Close Tolerance Screw
- 5305-01-070-1715 MPN BACB30LU3-19Close Tolerance Screw
- 5305-01-351-3522 MPN VLC0010-4-9Close Tolerance Screw
- 5306-00-127-7925 MPN 6844832-1439Close Tolerance Bolt
- 5306-00-616-6156 MPN 3M33-3-10AMachine Bolt
- 5306-01-046-0502 MPN VAL23608-3-8Shoulder Bolt
- 5306-01-052-7201 MPN VAL23029-5-12Close Tolerance Bolt
- 5306-01-174-3547 MPN LD111-0021-1022Shear Bolt
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-344-6718 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
VCD0020-10-20 | Valley-todeco, Inc. |
PBF1479-10-20A | Sps Technologies, Llc |
GB511GG10-20A | Northrop Grumman Systems Corporation |
GB511GG10-20A | Sps Technologies, Llc |