NSN 5306-01-375-0601
Close Tolerance Hex Head Bolt
Between 2.286 inches and 2.316 inches fastener length, double hexagon w/hole head style, between 0.338 inches and 0.358 inches head height, width between flats: 0.376 inches .
Manufacturer part number VS3060-5-28 for national stock number 5306013750601.
Datasheet
-
Product description
Close Tolerance Bolt NSN 5306-01-375-0601.
-
MPN or Model
VS3060-5-28
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.468 inches and 0.551 inches -
Fastener Length
Between 2.286 inches and 2.316 inches -
Head Style
Double hexagon w/hole -
Head Height
Between 0.338 inches and 0.358 inches -
Width Between Flats
0.376 inches -
Extended Washer Diameter
Between 0.521 inches and 0.531 inches -
Extended Washer Thickness
Between 0.072 inches and 0.092 inches -
Grip Diameter
Between 0.3115 inches and 0.3120 inches -
Thread Diameter
0.312 inches -
Grip Length
1.750 inches -
Thready Qty Per Inch (tpi)
24 -
Material
Steel comp xm-13 -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-01-160-7561 MPN ST3M557-5-18Close Tolerance Screw
- 5305-01-174-7044 MPN 9954M66P01Machine Screw
- 5305-01-668-3185 MPN BACB30LR4-9YClose Tolerance Screw
- 5306-00-352-0466 MPN VAL23033-8-17Shear Bolt
- 5306-01-043-5708 MPN VEP220121-7V12Shear Bolt
- 5306-01-043-6875 MPN VEP220121-9V25Shear Bolt
- 5306-01-044-6565 MPN VEH160271-3M-13Close Tolerance Bolt
- 5306-01-071-0861 MPN C7521-3-6Shear Bolt
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.
Pricing and Availability
Get a quote for 5306-01-375-0601 close tolerance boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
VS3060-5-28 | Arconic Global Fasteners & Rings, |
ST3M571-5-28 | Saturn Fasteners Inc |
S371-5-28 | Huck International, Inc. |
ST3M571-5-28 | Sps Technologies, Llc |
ST3M571-5-28 | Fastener Innovation Technology, Inc. |
11831-5-28 | Reid Products Inc. |
ST3M571-5-28 | Sps Technologies, Llc |
ST3M571-5-28 | Boeing Company, The |
74328-5-28 | Sps Technologies, Llc |
MB84-5-28 | Hi-shear Corporation |
VAL23033-5-28 | Valley-todeco, Inc. |
AIC752-5-28 | Sps Technologies, Llc |
S11-1059-5-28 | Sonic Industries Inc. |
MB84-5-28 | Lisi Aerospace Canada Corp |
S371-5-28 | Huck Intl Inc |
BM3326-5-28 | Deutsch Co The |
VS3060-5-28 | Alcoa Global Fasteners, Inc. |
GS1030-5-28 | B & B Specialties Inc. |