NSN 5306-01-440-7822
Coaxial Connector
Between 1.548 inches and 1.578 inches fastener length, dished hexagon head style, between 0.156 inches and 0.171 inches head height, width between flats: between 0.492 inches and 0.502 inches .
Manufacturer part number VCB0055H5-14 for national stock number 5306014407822.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-440-7822.
-
MPN or Model
VCB0055H5-14
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093490 - Bolt/nut/screw/clips/fastener/etc -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.688 inches -
Fastener Length
Between 1.548 inches and 1.578 inches -
Head Style
Dished hexagon -
Head Height
Between 0.156 inches and 0.171 inches -
Width Between Flats
Between 0.492 inches and 0.502 inches -
Hole Diameter
Between 0.070 inches and 0.080 inches -
Grip Diameter
Between 0.3110 inches and 0.3120 inches -
Thread Diameter
0.312 inches -
Grip Length
Between 0.865 inches and 0.885 inches -
Hole Quantity
3 -
Hole Type
Drilled -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Hole Configuration Style
Hexagon corners -
Surface Finish
32.0 microinches threads -
Material
Iron alloy 660 -
Material Specification
Ams 5631 assn standard single material response or ams 5737 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-01-349-4197 MPN VCL0009-4-5Close Tolerance Screw
- 5305-01-435-6493 MPN BACB30LU9-25Close Tolerance Screw
- 5305-01-512-8416 MPN 3M1170C3-9AFClose Tolerance Screw
- 5305-01-513-9637 MPN ST3M557-4-5Close Tolerance Screw
- 5305-01-523-5218 MPN BACS12ER04K7Machine Screw
- 5306-00-064-4367 MPN 3M33-7H13Shear Bolt
- 5306-00-883-9244 MPN MS21250-06036Shear Bolt
- 5306-01-044-6536 MPN VAL23607-5D14Shoulder Bolt
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-440-7822 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
VCB0055H5-14 | Valley-todeco, Inc. |
AIC1702H5-14 | Sps Technologies, Llc |
SC5060H-5-14 | Arconic Global Fasteners & Rings, |
3D0075H5-14 | Boeing Company, The |