NSN 5306-01-449-5410
Close Tolerance Hex Head Bolt
Between 1.641 inches and 1.671 inches fastener length, dished hexagon head style, between 0.156 inches and 0.171 inches head height, width between flats: between 0.300 inches and 0.310 inches .
Manufacturer part number BACB30NE5D19 for national stock number 5306014495410.
Datasheet
-
Product description
Close Tolerance Bolt NSN 5306-01-449-5410.
-
MPN or Model
BACB30NE5D19
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.469 inches -
Fastener Length
Between 1.641 inches and 1.671 inches -
Head Style
Dished hexagon -
Head Height
Between 0.156 inches and 0.171 inches -
Width Between Flats
Between 0.300 inches and 0.310 inches -
Grip Diameter
Between 0.3110 inches and 0.3120 inches -
Shank Unthreaded Hole Diameter
0.076 inches fastener and 0.086 inches fastener -
Thread Diameter
0.312 inches -
Grip Length
Between 1.177 inches and 1.977 inches -
Thready Qty Per Inch (tpi)
24 -
Distance From Head Largest Bearing Surface To Shank Hole Center
1.062 inches fastener -
Material
Steel comp 4340 -
Surface Treatment
Cadmium and chromate -
Thread Series Designator
Unjf
More from these suppliers
- 5305-01-056-1512 MPN BACB30LU4-27Close Tolerance Screw
- 5305-01-413-4581 MPN VCL0009-7-26Close Tolerance Screw
- 5305-01-435-5363 MPN BACB30LU8-18Close Tolerance Screw
- 5305-01-512-8411 MPN 3M1170D3-5AFClose Tolerance Screw
- 5305-01-526-4030 MPN 3M1169C5-18AClose Tolerance Screw
- 5306-00-040-9749 MPN VFK100G-06052Shear Bolt
- 5306-00-365-2980 MPN 68D291012-2003Externally Relieved Body Bolt
- 5306-01-045-6585 MPN VAL23607-3-34Shoulder Bolt
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.
Pricing and Availability
Get a quote for 5306-01-449-5410 close tolerance boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
BACB30NE5D19 | The Boeing Company |
BACB30NE5D19 | Sps Technologies, Llc |
BACB30NE5D19 | Valley-todeco, Inc. |
BACB30NE5D19 | Federal Manufacturing Corporation |
BACB30NE5D19 | Huck International, Inc. |
BACB30NE5D19 | Arconic Global Fasteners & Rings, |
BACB30NE5D19 | Sps Technologies, Llc |
BACB30NE5D19 | Sps Technologies, Llc |
BACB30NE5D19 | Arconic Global Fasteners & Rings, |
BACB30NE5D19 | Sps Technologies, Llc |
BACB30NE5D19 | Huck Intl Inc |