NSN 5306-01-459-3123
Coaxial Connector
Minimum tensile strength at 900 deg f.
Manufacturer part number 03A100-5-14 for national stock number 5306014593123.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-459-3123.
-
MPN or Model
03A100-5-14
-
Schedule B
7508.90.0000 (Other articles of nickel, nesoi (excluding cloth, grill & netting of nickel wire)) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.538 inches -
Fastener Length
Between 1.398 inches and 1.428 inches -
Head Style
Spline extended washer -
Head Height
Between 0.302 inches and 0.322 inches -
Extended Washer Diameter
Between 0.521 inches and 0.531 inches -
Extended Washer Thickness
Between 0.051 inches and 0.071 inches -
Grip Diameter
Between 0.3115 inches and 0.3120 inches -
Head Minor Diameter
Between 0.383 inches and 0.389 inches -
Thread Diameter
0.312 inches -
Grip Length
Between 0.865 inches and 0.885 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
180000 pounds per square inch -
Surface Finish
32.0 microinches threads -
Material
Nickel alloy 718 -
Material Specification
Ams 5662 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-245-4591 MPN BACB30LU3-6Close Tolerance Screw
- 5305-01-025-6961 MPN ST3M714-4D14Close Tolerance Screw
- 5306-00-059-1205 MPN 3M33-3H2Close Tolerance Bolt
- 5306-00-400-5741 MPN VFK100G-07018Shear Bolt
- 5306-01-044-7447 MPN VAL23607-5-8Shoulder Bolt
- 5306-01-054-3414 MPN C7521-6-7Shear Bolt
- 5306-01-054-3423 MPN C7521L6-20Shear Bolt
- 5306-01-131-2902 MPN VDP0001-4Assembled Washer Bolt
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-459-3123 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
03A100-5-14 | Northrop Grumman Technical Services, |
VCG0017-5-14 | Valley-todeco, Inc. |
AIC1655-5-14 | Sps Technologies, Llc |
PBF1422-5-14 | Sps Technologies, Llc |
123711-5-14 | Sps Technologies, Llc |
SII1185-5-14 | Sonic Industries Inc. |
MB211-5-14 | Hi-shear Corporation |
VS3320-5-14 | Alcoa Global Fasteners, Inc. |
MB211-5-14 | Lisi Aerospace Canada Corp |
X385-5-14 | Huck International, Inc. |
X385-5-14 | Huck Intl Inc |
03A100-5-14 | Northrop Grumman Systems Corporation |