NSN 5306-01-462-3395
Coaxial Connector
Between 2.459 inches and 2.489 inches fastener length, spline drive shear head head style, 0.275 inches head height, grip diameter: between 0.4360 inches and 0.4370 inches .
Manufacturer part number VCJ0002-7-30D for national stock number 5306014623395.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-462-3395.
-
MPN or Model
VCJ0002-7-30D
-
Schedule B
7508.90.0000 (Other articles of nickel, nesoi (excluding cloth, grill & netting of nickel wire)) -
NMF (National Motor Freight)
093490 - Bolt/nut/screw/clips/fastener/etc -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.599 inches -
Fastener Length
Between 2.459 inches and 2.489 inches -
Head Style
Spline drive shear head -
Head Height
0.275 inches -
Grip Diameter
Between 0.4360 inches and 0.4370 inches -
Shank Unthreaded Hole Diameter
0.129 inches first hole and 0.161 inches first hole -
Head Minor Diameter
0.707 inches -
Thread Diameter
0.437 inches -
Grip Length
Between 1.865 inches and 1.885 inches -
Thready Qty Per Inch (tpi)
20 -
Min. Tensile Strength (psi)
108000 pounds per square inch -
Distance From Head Largest Bearing Surface To Shank Hole Center
2.882 inches first hole and 2.902 inches first hole -
Surface Finish
32.0 microinches grip -
Material
Nickel alloy 718 -
Material Specification
Ams 5662 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-01-177-4985 MPN 5045M11P01Shoulder Screw
- 5305-01-365-0402 MPN BACB30LR4-5Close Tolerance Screw
- 5305-01-435-6321 MPN BACB30LU9-22Close Tolerance Screw
- 5305-01-462-2873 MPN 3M1169V5-10AClose Tolerance Screw
- 5306-00-150-3574 MPN GB511GG-7A-29AShear Bolt
- 5306-00-900-5282 MPN VFK100G-05066Shear Bolt
- 5306-01-079-1365 MPN VAL23029-3D7Close Tolerance Bolt
- 5306-01-115-9685 MPN VAL13043-2Internally Relieved Body Bolt
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-462-3395 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
VCJ0002-7-30D | Valley-todeco, Inc. |
AIC1237-7-30D | Sps Technologies, Llc |
PBF1542-7-30D | Sps Technologies, Llc |
84269-7-30D | Sps Technologies, Llc |
3D0029-7-30D | Boeing Company, The |
1237-7-30D | Sps Technologies, Llc |