NSN 5306-01-462-8433
Close Tolerance Hex Head Bolt
Between 2.937 inches and 2.957 inches fastener length, spline drive shear head head style, 0.400 inches head height, grip diameter: between 1.031 inches and 1.063 inches .
Manufacturer part number ST3M744-12D38 for national stock number 5306014628433.
Datasheet
-
Product description
Close Tolerance Bolt NSN 5306-01-462-8433.
-
MPN or Model
ST3M744-12D38
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.572 inches -
Fastener Length
Between 2.937 inches and 2.957 inches -
Head Style
Spline drive shear head -
Head Height
0.400 inches -
Grip Diameter
Between 1.031 inches and 1.063 inches -
Shank Unthreaded Hole Diameter
0.141 inches fastener and 0.146 inches fastener -
Head Minor Diameter
Between 1.097 inches and 1.107 inches -
End Application
F18 e/f -
Thread Diameter
0.750 inches -
Grip Length
2.375 inches -
Thready Qty Per Inch (tpi)
16 -
Criticality Code Justification
Agav -
Distance From Head Largest Bearing Surface To Shank Hole Center
0.982 inches fastener and 0.984 inches fastener -
Part Name Assigned By Controlling Agency
Bolt-close tolerance, spline drive, cres (125 ksi fsu) drilled, short thread -
Material
Steel comp xm-13 -
Material Specification
Ams 5629 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-01-158-6763 MPN SC2671-3-16Machine Screw
- 5305-01-413-7373 MPN VCL0009-4-28Close Tolerance Screw
- 5306-00-038-2452 MPN BACB30LM9DU-41Machine Bolt
- 5306-01-166-2609 MPN LD111-0020-0308Shear Bolt
- 5306-01-192-0683 MPN VG0001-3-13Close Tolerance Bolt
- 5306-01-206-7183 MPN BACB30NF7-13XShoulder Bolt
- 5306-01-211-7454 MPN VAL23033-5-82XShoulder Bolt
- 5306-01-299-1437 MPN 2186105Shoulder Bolt
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.
Pricing and Availability
Get a quote for 5306-01-462-8433 close tolerance boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
ST3M744-12D38 | Boeing Company, The |
11823-12D38 | Reid Products Inc. |
WC744-12D38 | West Coast Aerospace Inc |
VCG0001-12D38 | Valley-todeco, Inc. |
AIC687-12D38 | Sps Technologies, Llc |
VS3174-12D38 | Arconic Global Fasteners & Rings, |
ST3M744-12D38 | Heartland Precision Fasteners, Inc. |
VS3174-12D38 | Huck International, Inc. |
SLB748-12D38 | Space-lok, Inc. |
GS1015-12D38 | B & B Specialties Inc. |
PBF1265-12D38 | Sps Technologies, Llc |
122895-12D38 | Sps Technologies, Llc |
ST3M744-12D38 | Fastener Innovation Technology, Inc. |
122895-12D38 | Sps Technologies, Llc |
VS3174-12D38 | Alcoa Global Fasteners, Inc. |
ST3M744-12D38 | Houston Precision Fasteners I, Lp |