NSN 5306-01-591-0258
Coaxial Connector
Between 1.418 inches and 1.448 inches fastener length, spline drive shear head head style, 0.257 inches head height, grip diameter: 0.4358 mils and 0.4367 centimeters.
Manufacturer part number AIC596L7-12 for national stock number 5306015910258.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-591-0258.
-
MPN or Model
AIC596L7-12
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.683 inches -
Fastener Length
Between 1.418 inches and 1.448 inches -
Head Style
Spline drive shear head -
Head Height
0.257 inches -
Grip Diameter
0.4358 mils and 0.4367 centimeters -
Single Shear Strength
132000 pounds per square inch -
Head Minor Diameter
0.828 inches -
End Application
F16 -
Thread Diameter
0.438 inches -
Grip Length
0.750 inches -
Thready Qty Per Inch (tpi)
20 -
Min. Tensile Strength (psi)
23200 pounds per square inch -
Hardness Rating
46.0 rockwell c and 50.0 rockwell c -
Part Name Assigned By Controlling Agency
Bolt, external wrenching, spline drive, 132k shear -
Material
Steel comp h11 -
Material Specification
Ams 6487 assn standard single material response -
Surface Treatment
Oxide film -
Surface Treatment Specification
Mil-l-8937 or mil-l-46010, ty i federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-001-9753 MPN LK3U7Close Tolerance Screw
- 5305-01-387-2216 MPN VCL0009-4-19Close Tolerance Screw
- 5305-01-453-0715 MPN 3M925C3-7AClose Tolerance Screw
- 5305-01-512-8299 MPN 3M1170C6-18AClose Tolerance Screw
- 5306-00-110-8991 MPN 9632M29P05Shoulder Bolt
- 5306-00-115-1788 MPN 35-28078-11Machine Bolt
- 5306-00-205-3521 MPN VFK100G-05052Shear Bolt
- 5306-00-814-8382 MPN 3M33-4-19AClose Tolerance Bolt
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
![Mechanic Bill explains Coaxial Connector](/public/images/billy-thinking.png)
Pricing and Availability
Get a quote for 5306-01-591-0258 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
AIC596L7-12 | Sps Technologies, Llc |
H411L7-12 | Huck International, Inc. |
VCG0009L7-12 | Valley-todeco, Inc. |
120978L7-12 | Sps Technologies, Llc |
VS3133L7-12 | Tactair Fluid Controls, Inc. |
120978L7-12 | Sps Technologies, Llc |
C7521L7-12 | Lockheed Martin Corporation |
Stock Check
![](/public/images/partscage_shelf3.png)