NSN 5305-00-018-1629
Tap Bolt
0.625 inches fastener length, hexagon head style, between 0.226 inches and 0.243 inches head height, width between flats: between 0.551 inches and 0.563 inches .
Manufacturer part number MS35298-57 for national stock number 5305000181629.
Datasheet
-
Product description
Hexagon Head Cap Screw NSN 5305-00-018-1629.
-
MPN or Model
MS35298-57
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
2a -
Thread Direction
Right-hand -
Thread Length
0.625 inches -
Fastener Length
0.625 inches -
Head Style
Hexagon -
Head Height
Between 0.226 inches and 0.243 inches -
Width Between Flats
Between 0.551 inches and 0.563 inches -
Thread Diameter
0.375 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
120000 pounds per square inch -
Hardness Rating
23.0 rockwell c and 30.0 rockwell c -
Material
Steel -
Surface Treatment
Cadmium and chromate or zinc and chromate -
Thread Series Designator
Unf -
Nondefinitive Specification/std Data
2 type and 10p style and 5 grade
More from these suppliers
- 5945-00-295-6840 MPN 1878577Relay Armature
- 5905-00-726-2080 MPN 8599396-172Film Fixed Resistor
- 4920-00-772-1123 MPN 7110Aircraft Pneumatic System Components Test Station
- 5905-00-810-4350 MPN 7901311-004Inductive Wire Wound Fixed Resistor
- 4920-00-707-4623 MPN 6796783Curvic Co Protector
- 5305-00-011-2593 MPN 112593Hexagon Head Cap Screw
- 5305-00-013-1983 MPN 131983Machine Screw
- 5305-00-054-4483 MPN 9400864Setscrew
An externally threaded fastener designed for insertion into holes in assembled parts, for mating with a preformed internal thread and for tightening or releasing by torquing the head. the threaded and unthreaded portions are both of the same nominal diameter of 0.190 inch (5 mm) or larger. head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. the thread length being the controlled dimension, the grip length is not specified. a locking feature may be incorporated in the design of the head or threads. the head is not designed to be held or driven with an inserted driver or by the thumb and fingers. excludes bolt,machine; bolt,externally relieved body; bolt,internal wrenching; and screw,cap,socket head.
Pricing and Availability
Get a quote for 5305-00-018-1629 hexagon head cap screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
MS35298-57 | Military Standards |
FFS85TYPE2STYLE10PGRADE5 | Federal Specifications |
181629 | General Motors Corp |
181629 | Navistar Intl Corp |