NSN 5305-00-094-6874
High Torque Screw
0.835 inches fastener length, fillister countersunk head style, between 0.389 inches and 0.3948 inches head diameter, head height: 0.015 inches .
Manufacturer part number ST3M455-4-7-1 for national stock number 5305000946874.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-094-6874.
-
MPN or Model
ST3M455-4-7-1
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.326 inches -
Fastener Length
0.835 inches -
Head Style
Fillister countersunk -
Head Diameter
Between 0.389 inches and 0.3948 inches -
Head Height
0.015 inches -
Grip Diameter
Between 0.2490 inches and 0.2495 inches -
Internal Drive Style
High-torque -
Thread Diameter
0.250 inches -
Grip Length
0.438 inches -
Thready Qty Per Inch (tpi)
28 -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Material
Stainless steel -
Thread Series Designator
Unf
More from these suppliers
- 5305-01-141-7900 MPN 11879C6-17AShoulder Screw
- 5305-01-406-3058 MPN 11873-3-3-4Close Tolerance Screw
- 5305-01-513-9635 MPN 11923-4-3Close Tolerance Screw
- 5306-00-321-9271 MPN 11825-5-10Close Tolerance Bolt
- 5306-00-435-5825 MPN 11695A07U026Shear Bolt
- 5306-01-270-1238 MPN 11695A06U027Shear Bolt
- 5306-01-441-8209 MPN 11825-5D26Close Tolerance Bolt
- 5320-00-279-9605 MPN TL140-4-21Pin-rivet
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-00-094-6874 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
ST3M455-4-7-1 | Boeing Company, The |
11907-4-7-1 | Reid Products Inc. |