NSN 5305-00-206-3239
High Torque Screw
Between 1.249 inches and 1.296 inches fastener length, flat countersunk head style, between 0.752 inches and 0.762 inches head diameter, grip diameter: between 0.3737 inches and 0.3742 inches .
Manufacturer part number NAS336P11-5 for national stock number 5305002063239.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-206-3239.
-
MPN or Model
NAS336P11-5
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.615 inches and 0.682 inches -
Fastener Length
Between 1.249 inches and 1.296 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.752 inches and 0.762 inches -
Grip Diameter
Between 0.3737 inches and 0.3742 inches -
Shank Unthreaded Hole Diameter
0.106 inches first hole -
Single Shear Strength
105000 pounds per square inch -
Internal Drive Style
Cross recess type 1 -
Thread Diameter
0.375 inches -
Grip Length
Between 0.614 inches and 0.634 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Hardness Rating
36.0 rockwell c and 40.0 rockwell c -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Distance From Head Largest Bearing Surface To Shank Hole Center
1.052 inches first hole and 1.072 inches first hole -
Surface Finish
32.0 microinches grip -
Material
Steel comp 4140 or steel comp e4340 or steel comp 6150 or steel comp 8735 or steel comp 8740 -
Material Specification
Mil-s-5626 military specification 1st material response or mil-s-5000 military specification 2nd material response or mil-s-8503 military specification 3rd material response or mil-s-6098 military specification 4th material response or mil-s-6049 military specification 5th material response -
Thread Series Designator
Unf -
Specification Data
80205-nas336 professional/industrial association standard
More from these suppliers
- 5940-01-451-4407 MPN NAS1063A10-105BVTerminal Board Marker Strip
- 5940-01-384-3878 MPN NAS1063A2TB107TTerminal Board Marker Strip
- 5305-00-008-2105 MPN NAS1100E04-8PMachine Screw
- 5305-00-051-2324 MPN NASM51958Machine Screw
- 5305-00-058-9389 MPN MS51977-74Setscrew
- 5305-00-079-2587 MPN NAS1351C4-28Socket Head Cap Screw
- 5305-00-088-8332 MPN MS35190-272Machine Screw
- 5305-00-116-5020 MPN NAS1100C6-8Machine Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-00-206-3239 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS336P11-5 | National Aerospace Standards |