NSN 5305-00-369-1700
High Torque Screw
Between 1.390 inches and 1.437 inches fastener length, flat countersunk head style, between 0.501 inches and 0.506 inches head diameter, grip diameter: between 0.2485 inches and 0.2495 inches .
Manufacturer part number HT1029A4D15P for national stock number 5305003691700.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-369-1700.
-
MPN or Model
HT1029A4D15P
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.250 inches -
Fastener Length
Between 1.390 inches and 1.437 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.501 inches and 0.506 inches -
Grip Diameter
Between 0.2485 inches and 0.2495 inches -
Shank Unthreaded Hole Diameter
0.076 inches first hole -
Internal Drive Style
High-torque -
Thread Diameter
0.250 inches -
Grip Length
Between 0.928 inches and 0.948 inches -
Thready Qty Per Inch (tpi)
28 -
Countersink Angle
100.0 degrees -
Distance From Head Largest Bearing Surface To Shank Hole Center
0.140 inches first hole and 0.187 inches first hole -
Surface Finish
32.0 microinches threads -
Material
Iron alloy 660 -
Material Specification
Ams 5731 assn standard single material response -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416 type 2 class 3 federal specification all treatment responses -
Thread Series Designator
Unf
More from these suppliers
- 5305-00-364-9543 MPN CHT4025-3-6Close Tolerance Screw
- 5305-00-680-5873 MPN BACB30LU4D17Machine Screw
- 5305-00-969-4761 MPN VS2761-023Socket Head Cap Screw
- 5305-01-081-3102 MPN ST3M495-4-3-1Shoulder Screw
- 5305-01-106-3860 MPN HT4068-5-10AClose Tolerance Screw
- 5305-01-261-1895 MPN 51B334-9XClose Tolerance Screw
- 5305-01-270-3227 MPN HT4020-5-15YShoulder Screw
- 5305-01-462-2832 MPN TX1026V4-10AClose Tolerance Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-00-369-1700 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
HT1029A4D15P | Arconic Global Fasteners & Rings, |
HT123-4D15P | Huck International, Inc. |
54291-4D15P | Sps Technologies, Llc |
HT1029A4D15P | Alcoa Global Fasteners, Inc. |
3M123-4D15P | Arconic Global Fasteners & Rings, |
3M123-4D15P | Huck International, Inc. |
3M123-4D15P | Sps Technologies, Llc |
HT4N-15DP | Hi-shear Corporation |
HT4N-15DP | Lisi Aerospace Canada Corp |
3M123-4D15P | Boeing Company, The |
HT123-4D15P | Huck Intl Inc |