NSN 5305-00-395-3455
High Torque Screw
Between 1.016 inches and 1.046 inches fastener length, flat countersunk head style, between 0.429 inches and 0.477 inches head diameter, grip diameter: between 0.3115 inches and 0.3120 inches .
Manufacturer part number HT4024L5-8-1 for national stock number 5305003953455.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-395-3455.
-
MPN or Model
HT4024L5-8-1
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.506 inches and 0.556 inches -
Fastener Length
Between 1.016 inches and 1.046 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.429 inches and 0.477 inches -
Grip Diameter
Between 0.3115 inches and 0.3120 inches -
Internal Drive Style
High-torque -
Thread Diameter
0.312 inches -
Grip Length
Between 0.490 inches and 0.510 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
125000 pounds per square inch -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Material
Stainless steel -
Surface Treatment
Passivate -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-460-4669 MPN VT1040-4-2Close Tolerance Screw
- 5305-00-494-5678 MPN HT8136-1Close Tolerance Screw
- 5305-01-117-9742 MPN HT8140-8-24Close Tolerance Screw
- 5305-01-129-9811 MPN 3M707-3-1-4Close Tolerance Screw
- 5305-01-142-7212 MPN HT4041-7-17-9XShoulder Screw
- 5305-01-143-4077 MPN HT4020-7-13AYShoulder Screw
- 5305-01-253-4860 MPN HT4027-4-6Close Tolerance Screw
- 5305-01-286-3112 MPN SC1786R-3-16Close Tolerance Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-00-395-3455 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
HT4024L5-8-1 | Huck International, Inc. |
ST3M455-5L8-1 | Fastener Innovation Technology, Inc. |
WC4026L5-8 | West Coast Aerospace Inc |
HT4024L5-8-1 | Hi-shear Corporation |
HT4024L5-8-1 | Sps Technologies, Llc |
HT4024L5-8-1 | Lisi Aerospace Canada Corp |
HT4024LS-8 | Sps Technologies, Llc |
HT4024LS-8 | Alcoa Global Fasteners, Inc. |
HT4024L5-8-1 | Arconic Global Fasteners & Rings, |
11907-5L8-1 | Reid Products Inc. |
HT4024L5-8-1 | Sps Technologies Ltd Tj Brooks |
ST3M455-5L8-1 | Boeing Company, The |
HT4024L5-8-1 | Sps Technologies Inc |
HT4024LS-8 | Huck Intl Inc |
HT4024L5-8 | Huck Intl Inc |
HT4024L5-8-1 | Huck Intl Inc |
10125262 | Nimikkeistokeskus Ncb Finland |
HT4024L5-8 | Sps Technologies, Llc |
HT4024L5-8 | Alcoa Global Fasteners, Inc. |
HT4024L5-8 | Hi-shear Corporation |
HT4024L5-8-1 | Alcoa Global Fasteners, Inc. |