NSN 5305-00-522-9298
High Torque Screw
Retaining element in shank.
Manufacturer part number CA2657-3-12 for national stock number 5305005229298.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-522-9298.
-
MPN or Model
CA2657-3-12
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.262 inches and 0.313 inches -
Fastener Length
Between 1.122 inches and 1.142 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.328 inches and 0.385 inches -
Grip Diameter
Between 0.1889 inches and 0.1894 inches -
Shank Unthreaded Hole Diameter
0.070 inches first hole and 0.080 inches first hole -
Internal Drive Style
High-torque -
Thread Diameter
0.190 inches -
Grip Length
Between 0.750 inches and 0.766 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Countersink Angle
100.0 degrees -
Distance From Head Largest Bearing Surface To Shank Hole Center
1.033 inches first hole and 1.053 inches first hole -
Surface Finish
63.0 microinches grip -
Material
Iron alloy 660 -
Material Specification
Ams 5732 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5935-01-296-3828 MPN CA4323Electrical Receptacle Connector
- 5305-00-222-2013 MPN CA28080-3B-7SPanel Screw Assembly
- 5305-00-367-5911 MPN CA28080-4-13HSPanel Screw Assembly
- 5305-00-495-3389 MPN CA2880-6PPanel Screw Assembly
- 5305-01-033-8209 MPN CA1376-10-11QPanel Screw Assembly
- 5306-00-395-4998 MPN CA2652-04-18Close Tolerance Bolt
- 5306-01-102-2674 MPN SS27576-4-09Machine Bolt
- 5306-01-518-8700 MPN CA21387-6-7TXInternal Wrenching Bolt
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-00-522-9298 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
CA2657-3-12 | Arconic Global Fasteners & Rings, |
AS139-3-12 | Avibank Mfg., Inc. |