NSN 5305-00-541-9195
High Torque Screw
Between 1.557 inches and 1.604 inches fastener length, flat countersunk head style, between 0.950 inches and 1.017 inches head diameter, grip diameter: between 0.4982 inches and 0.4991 inches .
Manufacturer part number 106706H8A13 for national stock number 5305005419195.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-541-9195.
-
MPN or Model
106706H8A13
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.735 inches and 0.802 inches -
Fastener Length
Between 1.557 inches and 1.604 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.950 inches and 1.017 inches -
Grip Diameter
Between 0.4982 inches and 0.4991 inches -
Internal Drive Style
High-torque -
Thread Diameter
0.500 inches -
Grip Length
Between 0.802 inches and 0.822 inches -
Thready Qty Per Inch (tpi)
20 -
Min. Tensile Strength (psi)
220000 pounds per square inch -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Part Name Assigned By Controlling Agency
Navy special project -
Material
Steel comp h11 -
Material Specification
Ams 6487 assn standard single material response -
Surface Treatment
Cadmium -
Surface Treatment Specification
Nas672 assn standard single treatment response or mil-c-8837 type 2 cl 2 military specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-536-7266 MPN HT4024L7-7Close Tolerance Screw
- 5305-00-915-2191 MPN 64228V3-7Machine Screw
- 5305-00-948-4110 MPN NAS1102-06-20Machine Screw
- 5305-01-024-4753 MPN NAS1221-3-10BMachine Screw
- 5305-01-025-6961 MPN HT4049-4D14Close Tolerance Screw
- 5305-01-025-6962 MPN HT4049-4D15Close Tolerance Screw
- 5305-01-047-1069 MPN HT4011-5-17Socket Head Cap Screw
- 5305-01-050-9003 MPN 121557-5-A14PClose Tolerance Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-00-541-9195 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
106706H8A13 | Sps Technologies, Llc |
106706H8A13 | Sps Technologies, Llc |
106706H8A13 | Sps Technologies, Llc |
106706H8A13 | Sps Technologies, Llc |
106706H8A13 | Sps Technologies, Llc |
106706H8A13 | Sps Technologies, Llc |
106706H8A13 | Sps Technologies, Llc |
106706H8A13 | Sps Technologies, Llc |
106706H8A13 | Sps Technologies, Llc |
106706H8A13 | Sps Technologies, Llc |
106706H8A13 | Sps Technologies, Llc |
106706H8A13 | Sps Technologies, Llc |
106706H8A13 | Sps Technologies, Llc |
106706H8A13 | Sps Technologies, Llc |
106706H8A13 | Sps Technologies, Llc |
106706H8A13 | Sps Technologies, Llc |
106706H8A13 | Sps Technologies, Llc |
106706H8A13 | Sps Technologies, Llc |
106706H8A13 | Sps Technologies, Llc |
106706H8A13 | Sps Technologies, Llc |