NSN 5305-00-800-1210
High Torque Screw
Between 2.328 inches and 2.375 inches fastener length, flat countersunk head style, between 0.629 inches and 0.633 inches head diameter, grip diameter: between 0.3110 inches and 0.3120 inches .
Manufacturer part number NAS498 for national stock number 5305008001210.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-800-1210.
-
MPN or Model
NAS498
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.531 inches -
Fastener Length
Between 2.328 inches and 2.375 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.629 inches and 0.633 inches -
Grip Diameter
Between 0.3110 inches and 0.3120 inches -
Internal Drive Style
High-torque -
Thread Diameter
0.312 inches -
Grip Length
1.812 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Hardness Rating
36.0 rockwell c and 40.0 rockwell c -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Surface Finish
32.0 microinches threads -
Material
Steel comp 4140 or steel comp e4340 or steel comp 6150 or steel comp 8735 or steel comp 8740 or steel comp 4130 -
Material Specification
Mil-s-5626 military specification 1st material response or mil-s-5400 military specification 2nd material response or mil-s-8503 military specification 3rd material response or mil-s-6098 military specification 4th material response or mil-s-6049 military specification 5th material response or mil-s-6758 military specification 6th material response -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416, type 2, class 3 federal specification single treatment response -
Thread Series Designator
Unf -
Specification Data
80205-nas585 professional/industrial association standard
More from these suppliers
- 5940-01-118-6632 MPN NAS1745-21Conductor Splice
- 1680-01-613-6300 MPN 82872Dirt And Liquid Deflector
- 5940-01-384-3964 MPN NAS1063C5TB177BTerminal Board Marker Strip
- 5940-01-447-2944 MPN NAS1063A3-504ALTerminal Board Marker Strip
- 5305-00-007-0282 MPN NAS1100E08-12PMachine Screw
- 5305-00-008-5910 MPN NAS1189C3T10Socket Head Cap Screw
- 5305-00-046-9800 MPN NAS514P1032-13PMachine Screw
- 5305-00-052-7532 MPN MS24617-59Tapping Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-00-800-1210 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS498 | National Aerospace Standards |
NAS585-29 | National Aerospace Standards |