NSN 5305-00-929-9213
High Torque Screw
Two spring loaded balls in shank as self retaining feature.
Manufacturer part number 7823864-1-04-21 for national stock number 5305009299213.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-929-9213.
-
MPN or Model
7823864-1-04-21
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.268 inches and 0.315 inches -
Fastener Length
Between 1.600 inches and 1.627 inches -
Head Style
Crowned hexagon -
Head Height
Between 0.131 inches and 0.141 inches -
Width Between Flats
Between 0.429 inches and 0.439 inches -
Locking Feature
Detent ball grip -
Grip Diameter
Between 0.2483 inches and 0.2492 inches -
Shank Unthreaded Hole Diameter
0.076 inches second hole and 0.086 inches second hole -
Internal Drive Style
Slot -
Thread Diameter
0.250 inches -
Grip Length
Between 1.312 inches and 1.332 inches -
Thready Qty Per Inch (tpi)
28 -
Distance From Head Largest Bearing Surface To Shank Hole Center
1.472 inches second hole and 1.519 inches second hole -
Material
Steel -
Surface Treatment
Cadmium -
Surface Treatment Specification
Fs251, fscm 88277 mfr ref single treatment response -
Thread Series Designator
Unf
More from these suppliers
- 5306-00-486-5626 MPN AS194-4-12Close Tolerance Bolt
- 5306-01-175-0999 MPN AS300-4-41Close Tolerance Bolt
- 5306-01-389-0255 MPN RT132BA4-6LInternal Wrenching Bolt
- 1560-00-075-8255 MPN 3819652-5Attaching Angle
- 1560-00-121-5893 MPN 5118162-2Hydraulic Line Assy
- 1680-00-122-0384 MPN 5822131-515Aircraft Ejection Seat
- 1560-00-122-2416 MPN 5115202-215NAileron Nose Ri Rib
- 1560-00-224-0267 MPN 5814582-509Special Purpose Thermal Insulation
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-00-929-9213 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
7823864-1-04-21 | Boeing Company, The |
7823864-1-04-21 | Avibank Mfg., Inc. |