NSN 5305-01-015-3365
High Torque Screw
Between 0.953 inches and 0.983 inches fastener length, flat countersunk head style, between 0.376 inches and 0.385 inches head diameter, grip diameter: between 0.1890 inches and 0.1895 inches .
Manufacturer part number ST3M454-3L9 for national stock number 5305010153365.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-015-3365.
-
MPN or Model
ST3M454-3L9
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.381 inches and 0.431 inches -
Fastener Length
Between 0.953 inches and 0.983 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.376 inches and 0.385 inches -
Grip Diameter
Between 0.1890 inches and 0.1895 inches -
Internal Drive Style
High-torque -
Thread Diameter
0.190 inches -
Grip Length
Between 0.552 inches and 0.572 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
125000 pounds per square inch -
Countersink Angle
100.0 degrees -
Material
Steel comp xm-13 -
Material Specification
Ams 5629 assn standard single material response -
Surface Treatment
Passivate -
Thread Series Designator
Unjf
More from these suppliers
- 5305-01-006-2736 MPN ST3M454-4LBClose Tolerance Screw
- 5305-01-212-1987 MPN BACB30LU4P7Close Tolerance Screw
- 5305-01-417-2491 MPN 3M1169V4-19AClose Tolerance Screw
- 5305-01-496-5238 MPN 3M1169V4-17AClose Tolerance Screw
- 5305-01-599-5488 MPN PMT1123-10Close Tolerance Screw
- 5306-01-013-3992 MPN VAL23033-3-5Shear Bolt
- 5306-01-044-5196 MPN VAL23607-5D25Shoulder Bolt
- 5306-01-054-3415 MPN VCG0009-7-14Shear Bolt
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-015-3365 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
ST3M454-3L9 | Valley-todeco, Inc. |
HT4025L3-9 | Sps Technologies, Llc |
ST3M454-3L9 | Heartland Precision Fasteners, Inc. |
HT4025L3-9 | Huck International, Inc. |
ST3M454-3L9 | Houston Precision Fasteners I, Lp |
HT4025L3-9 | Sps Technologies, Llc |
11905-3L9 | Reid Products Inc. |
ST3M454-3L9 | Fastener Innovation Technology, Inc. |
WC4025L-3-9 | West Coast Aerospace Inc |
HT4025L3-9 | Sps Technologies, Llc |
HT4025L3-9 | Hi-shear Corporation |
HT4025L3-9 | Sps Technologies, Llc |
HT4025L3-9 | Arconic Global Fasteners & Rings, |
HT4025L3-9 | Lisi Aerospace Canada Corp |
ST3M454-3L9 | Boeing Company, The |
HT4025L3-9 | Sps Technologies Ltd Tj Brooks |
HT4025L3-9 | Sps Technologies Inc |
HT4025L3-9 | Huck Intl Inc |
10114845 | Nimikkeistokeskus Ncb Finland |
HT4025L3-9 | Alcoa Global Fasteners, Inc. |
HT4025L3-9 | Epi Printers, Inc. |
Stock Check
- NS: 355
- NE: 1292