NSN 5305-01-033-0413
High Torque Screw
Between 1.113 inches and 1.143 inches fastener length, flat countersunk head style, between 0.497 inches and 0.507 inches head diameter, grip diameter: between 0.2490 inches and 0.2495 inches .
Manufacturer part number HT4049-4D13 for national stock number 5305010330413.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-033-0413.
-
MPN or Model
HT4049-4D13
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.291 inches and 0.341 inches -
Fastener Length
Between 1.113 inches and 1.143 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.497 inches and 0.507 inches -
Grip Diameter
Between 0.2490 inches and 0.2495 inches -
Shank Unthreaded Hole Diameter
0.076 inches first hole and 0.081 inches first hole -
Internal Drive Style
High-torque -
Thread Diameter
0.250 inches -
Grip Length
Between 0.802 inches and 0.822 inches -
Thready Qty Per Inch (tpi)
28 -
Countersink Angle
100.0 degrees -
Distance From Head Largest Bearing Surface To Shank Hole Center
0.113 inches first hole and 0.123 inches first hole -
Material
Steel -
Material Specification
23-112, mcdonnel douglas corporation mfr ref single material response -
Surface Treatment
Passivate -
Thread Series Designator
Unjf
More from these suppliers
- 5305-01-406-3058 MPN 3M707-3-3-4Close Tolerance Screw
- 5305-00-456-7806 MPN NAS1133V5Close Tolerance Screw
- 5305-01-125-8247 MPN SC1763-3-3Machine Screw
- 5305-01-143-5041 MPN HT4020-4-12AXShoulder Screw
- 5305-01-190-2191 MPN SC2174-06-5Machine Screw
- 5305-01-497-0829 MPN TX1027C4-2AClose Tolerance Screw
- 5305-01-512-8414 MPN TX1027C3-7AFClose Tolerance Screw
- 5305-01-512-8416 MPN TX1027C3-9AFClose Tolerance Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-033-0413 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
HT4049-4D13 | Huck International, Inc. |
HT4049-4D13 | Arconic Global Fasteners & Rings, |
HT4049-4D13 | Hi-shear Corporation |
HT4049-4D13 | Sps Technologies, Llc |
HT4049-4D13 | Lisi Aerospace Canada Corp |
HT4049-4D13 | Alcoa Global Fasteners, Inc. |
HT4049-4D13 | Sps Technologies, Llc |
ST3M714-4D13 | Fastener Innovation Technology, Inc. |
ST3M714-4D13 | West Coast Aerospace Inc |
ST3M714-4D13 | Sps Technologies Ltd Tj Brooks |
ST3M714-4D13 | Boeing Company, The |
HT4049-4D13 | Huck Intl Inc |
ST3M714-4D13 | Twist Tite Mfg, Inc |