NSN 5305-01-280-6738
High Torque Screw
Between 0.761 inches and 0.791 inches fastener length, flat countersunk head style, between 0.339 inches and 0.381 inches head diameter, grip diameter: between 0.3145 inches and 0.3147 inches .
Manufacturer part number HT4054-3-7A for national stock number 5305012806738.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-280-6738.
-
MPN or Model
HT4054-3-7A
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.313 inches and 0.363 inches -
Fastener Length
Between 0.761 inches and 0.791 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.339 inches and 0.381 inches -
Grip Diameter
Between 0.3145 inches and 0.3147 inches -
Internal Drive Style
High-torque -
Thread Diameter
0.190 inches -
Grip Length
Between 0.428 inches and 0.448 inches -
Features Provided
Cetyl alcohol lubricant -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
180000 pounds per square inch -
Hardness Rating
39.0 rockwell c and 43.0 rockwell c -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Surface Finish
32.0 microinches threads -
Material
Steel comp 8740 -
Material Specification
Mil-c-6049 military specification single material response -
Surface Treatment
Aluminum and chromate -
Surface Treatment Specification
Mil-c-83488 type 2 cl 3 military specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-01-206-7260 MPN 3M926-3DL6Close Tolerance Screw
- 5305-00-040-9431 MPN HT8140-4-23Close Tolerance Screw
- 5305-00-068-5371 MPN C082-5-18Close Tolerance Screw
- 5305-00-840-8068 MPN PH399-0440-5PMachine Screw
- 5305-01-131-6730 MPN HT4053-5-9AClose Tolerance Screw
- 5305-01-158-5373 MPN 3M893-5-6Machine Screw
- 5305-01-265-4800 MPN HT4011-7-7Shoulder Screw
- 5305-01-266-8396 MPN HT4024L3D25-1Close Tolerance Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-280-6738 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
HT4054-3-7A | Huck International, Inc. |
HT4054-3-7A | Arconic Global Fasteners & Rings, |
ST3M730-3L7 | Boeing Company, The |
HT4054-3-7A | Hi-shear Corporation |
HT4054-3-7A | Sps Technologies, Llc |
HT4054-3-7A | Lisi Aerospace Canada Corp |
HT4054-3-7A | Huck Intl Inc |
10113637 | Nimikkeistokeskus Ncb Finland |
HT4054-3-7A | Alcoa Global Fasteners, Inc. |
ST3M730-3L7 | Twist Tite Mfg, Inc |