NSN 5305-01-051-8040
High Torque Screw
Between 5.731 inches and 5.751 inches fastener length, crowned hexagon head style, between 0.126 inches and 0.141 inches head height, width between flats: between 0.430 inches and 0.439 inches .
Manufacturer part number MS3369B485 for national stock number 5305010518040.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-051-8040.
-
MPN or Model
MS3369B485
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.278 inches and 0.329 inches -
Fastener Length
Between 5.731 inches and 5.751 inches -
Head Style
Crowned hexagon -
Head Height
Between 0.126 inches and 0.141 inches -
Width Between Flats
Between 0.430 inches and 0.439 inches -
Locking Feature
Detent ball grip -
Grip Diameter
Between 0.2487 inches and 0.2492 inches -
Shank Unthreaded Hole Diameter
0.076 inches first hole and 0.086 inches first hole -
Internal Drive Style
Slot -
Thread Diameter
0.250 inches -
Grip Length
Between 5.312 inches and 5.328 inches -
Thready Qty Per Inch (tpi)
28 -
Distance From Head Largest Bearing Surface To Shank Hole Center
5.645 inches first hole and 5.661 inches first hole -
Surface Finish
32.0 microinches grip -
Material
Steel comp xm-13 -
Material Specification
Ams 5629 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-01-188-7279 MPN CA2651-3-09Close Tolerance Screw
- 5305-01-304-1516 MPN 21T01-1-08-3AAPanel Screw Assembly
- 5305-01-490-3012 MPN CA2292-08-6-8Panel Screw Assembly
- 5305-01-521-5370 MPN CA21062-10-2-14Close Tolerance Screw
- 5306-01-588-5595 MPN CA2194-3-10Machine Bolt
- 5305-00-151-8676 MPN AS109-04-9Socket Head Cap Screw
- 5305-01-279-8872 MPN SS5112-427Machine Screw
- 5306-01-285-2752 MPN AS172-060-320Close Tolerance Bolt
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-051-8040 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
MS3369B485 | Military Standards |
AS169-4-85 | Avibank Mfg., Inc. |
CA2658-4-85 | Arconic Global Fasteners & Rings, |