NSN 5305-01-054-6264
High Torque Screw
Between 1.076 inches and 1.106 inches fastener length, flat countersunk head style, between 0.350 inches and 0.399 inches head diameter, grip diameter: between 0.2485 inches and 0.2495 inches .
Manufacturer part number C7985-4-11 for national stock number 5305010546264.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-054-6264.
-
MPN or Model
C7985-4-11
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.378 inches and 0.428 inches -
Fastener Length
Between 1.076 inches and 1.106 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.350 inches and 0.399 inches -
Grip Diameter
Between 0.2485 inches and 0.2495 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.250 inches -
Grip Length
Between 0.678 inches and 0.698 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
220000 pounds per square inch -
Hardness Rating
46.0 rockwell c and 49.0 rockwell c -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Material
Steel comp h11 -
Material Specification
Ams 6487 assn standard single material response -
Surface Treatment
Cadmium -
Surface Treatment Specification
Nas 672 assn standard single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-357-1878 MPN HT4028L4-9Close Tolerance Screw
- 5305-01-054-4636 MPN BACB30LK3-4Close Tolerance Screw
- 5305-01-158-6763 MPN SC2671-3-16Machine Screw
- 5305-01-191-4595 MPN HT4057-3-12AClose Tolerance Screw
- 5305-01-193-6809 MPN LE111-0032-2313Machine Screw
- 5305-01-264-3756 MPN LE111-0032-2148Machine Screw
- 5305-01-381-5754 MPN AIC1652-5-39Close Tolerance Screw
- 5306-00-538-7814 MPN AIC261M3-6Close Tolerance Bolt
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-054-6264 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
C7985-4-11 | Lockheed Martin Corporation |
PBF1166-4-11 | Sps Technologies, Llc |
121558-4-A11P | Sps Technologies, Llc |
VT1694F4-11 | Alcoa Global Fasteners, Inc. |
AIC985-4-11P | Sps Technologies, Llc |
VT1694F4-11 | Arconic Global Fasteners & Rings, |
121558-4-A11P | Sps Technologies, Llc |
AIC985-4-11 | Sps Technologies, Llc |