NSN 5305-01-078-2929
High Torque Screw
Between 1.078 inches and 1.125 inches fastener length, flat countersunk undercut head style, between 0.377 inches and 0.381 inches head diameter, head height: between 0.044 inches and 0.046 inches .
Manufacturer part number HT4020-3-11 for national stock number 5305010782929.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-078-2929.
-
MPN or Model
HT4020-3-11
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.380 inches and 0.447 inches -
Fastener Length
Between 1.078 inches and 1.125 inches -
Head Style
Flat countersunk undercut -
Head Diameter
Between 0.377 inches and 0.381 inches -
Head Height
Between 0.044 inches and 0.046 inches -
Grip Diameter
Between 0.1890 inches and 0.1895 inches -
Internal Drive Style
High-torque -
Thread Diameter
0.190 inches -
Grip Length
Between 0.678 inches and 0.698 inches -
Thready Qty Per Inch (tpi)
32 -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Surface Finish
32.0 microinches threads -
Material
Stainless steel -
Material Specification
23-112, fscm 76301 mfr ref single material response -
Surface Treatment
Passivate -
Thread Series Designator
Unjf -
Specification Data
76301-st3-652 manufacturers standard
More from these suppliers
- 5305-00-220-2559 MPN HT1029A3-10Close Tolerance Screw
- 5305-00-505-2754 MPN LS15266V3-18Close Tolerance Screw
- 5305-01-013-9598 MPN HT8177-7D19Close Tolerance Screw
- 5305-01-028-0186 MPN HT1029A-5-10Close Tolerance Screw
- 5305-01-126-9396 MPN C7984-5-8Close Tolerance Screw
- 5305-01-135-4125 MPN SC2671-4-11Machine Screw
- 5305-01-141-7198 MPN HT4020-5-16AYShoulder Screw
- 5305-01-143-5041 MPN HT4020-4-12AXShoulder Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-078-2929 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
HT4020-3-11 | Huck International, Inc. |
HT4020-3-11 | Arconic Global Fasteners & Rings, |
ST3M652C3-11D | Boeing Company, The |
HT4020-3-11 | Sps Technologies, Llc |
HT4020-3-11 | Hi-shear Corporation |
HT4020-3-11 | Alcoa Global Fasteners, Inc. |
11925C3-11D | Reid Products Inc. |
HT4020-3-11 | Lisi Aerospace Canada Corp |
HT4020-3-11 | Huck Intl Inc |
HT4020-3-11 | Sps Technologies, Llc |