NSN 5305-01-098-0594
High Torque Screw
Between 1.016 inches and 1.046 inches fastener length, oval countersunk head style, between 0.2966 inches and 0.3016 inches head diameter, grip diameter: between 0.1885 inches and 0.1895 inches .
Manufacturer part number S5008-3-10 for national stock number 5305010980594.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-098-0594.
-
MPN or Model
S5008-3-10
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.406 inches -
Fastener Length
Between 1.016 inches and 1.046 inches -
Head Style
Oval countersunk -
Head Diameter
Between 0.2966 inches and 0.3016 inches -
Grip Diameter
Between 0.1885 inches and 0.1895 inches -
Internal Drive Style
High-torque -
Thread Diameter
0.190 inches -
Grip Length
Between 0.615 inches and 0.635 inches -
Thready Qty Per Inch (tpi)
32 -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Material
Steel comp xm-13 -
Material Specification
Ams 5629 assn standard single material response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-162-4064 MPN SC1777V08-9Machine Screw
- 5305-00-283-7456 MPN ST3M430V4-10ASClose Tolerance Screw
- 5305-00-345-1590 MPN LS15265V08-2Close Tolerance Screw
- 5305-00-767-3272 MPN 51B220-4Close Tolerance Screw
- 5305-01-054-6246 MPN SC1776-7-16Close Tolerance Screw
- 5305-01-099-9502 MPN 51B650-3-8Machine Screw
- 5305-01-190-2191 MPN SC2174-06-5Machine Screw
- 5305-01-220-6497 MPN SC1779-4-8Close Tolerance Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-098-0594 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
S5008-3-10 | Northrop Grumman Systems Corporation |
S5008-3-10 | Arconic Global Fasteners & Rings, |
S5008-3-10 | Sps Technologies, Llc |
S5008-3-10 | Hi-shear Corporation |
S5008-3-10 | Lisi Aerospace Canada Corp |