NSN 5305-01-102-1869
High Torque Screw
Between 1.078 inches and 1.108 inches fastener length, flat countersunk head style, between 0.625 inches and 0.635 inches head diameter, grip diameter: between 0.3115 inches and 0.3120 inches .
Manufacturer part number HT4025L5-9 for national stock number 5305011021869.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-102-1869.
-
MPN or Model
HT4025L5-9
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.506 inches and 0.556 inches -
Fastener Length
Between 1.078 inches and 1.108 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.625 inches and 0.635 inches -
Grip Diameter
Between 0.3115 inches and 0.3120 inches -
Internal Drive Style
High-torque -
End Application
Aircraft, eagle f-15; f/a-18 hornet -
Thread Diameter
0.312 inches -
Grip Length
Between 0.552 inches and 0.572 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
125000 pounds per square inch -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Material
Steel comp xm-13 -
Material Specification
Ams 5629 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-01-241-2653 MPN 3M925C4-18AClose Tolerance Screw
- 5305-01-350-4207 MPN VCL0009-3D4Close Tolerance Screw
- 5305-01-454-0901 MPN LD111-0046-2410Machine Screw
- 5306-00-356-1708 MPN VAL23029-4-23Close Tolerance Bolt
- 5306-00-863-1221 MPN VBP1221-9Internally Relieved Body Bolt
- 5306-00-958-9162 MPN VFK100G-06032Shear Bolt
- 5306-00-959-0984 MPN C630-4-11Internal Wrenching Bolt
- 5306-01-054-3427 MPN VCG0009L7-16Shear Bolt
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-102-1869 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
HT4025L5-9 | Sps Technologies, Llc |
HT4025L5-9 | Alcoa Global Fasteners, Inc. |
HT4025L5-9 | Hi-shear Corporation |
HT4025L5-9 | Lisi Aerospace Canada Corp |
HT4025L5-9 | Sps Technologies, Llc |
ST3M454-5L9 | Boeing Company, The |
HT4025L5-9 | Alcoa Fastening Systems |
HT4025L5-9 | Sps Technologies, Llc |
ST3M454-5L9 | Valley-todeco, Inc. |
ST3M454-5L9 | Arconic Global Fasteners & Rings, |
ST3M454-5L9 | Heartland Precision Fasteners, Inc. |
HT4025L5-9 | Huck International, Inc. |
ST3M454-5L9 | Houston Precision Fasteners I, Lp |
HT4025L5-9 | Sps Technologies, Llc |
ST3M454-5L9 | Fastener Innovation Technology, Inc. |
11905-5L9 | Reid Products Inc. |
ST3M454-5L9 | West Coast Aerospace Inc |
ST3M454-5L9 | Sps Technologies Ltd Tj Brooks |
ST3M454-5L9 | Sps Technologies Inc |
HT4025L5-9 | Huck Intl Inc |
10115012 | Nimikkeistokeskus Ncb Finland |