NSN 5305-01-140-7286
High Torque Screw
Between 0.812 inches and 0.842 inches fastener length, flat countersunk head style, between 0.455 inches and 0.510 inches head diameter, grip diameter: between 0.2485 inches and 0.2495 inches .
Manufacturer part number BACB30LH4-7 for national stock number 5305011407286.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-140-7286.
-
MPN or Model
BACB30LH4-7
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.364 inches and 0.414 inches -
Fastener Length
Between 0.812 inches and 0.842 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.455 inches and 0.510 inches -
Grip Diameter
Between 0.2485 inches and 0.2495 inches -
Internal Drive Style
Cross recess type 1 -
Thread Diameter
0.250 inches -
Grip Length
Between 0.428 inches and 0.448 inches -
Thready Qty Per Inch (tpi)
28 -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Surface Finish
32.0 microinches threads -
Material
Iron alloy 660 -
Material Specification
Ams 5737 assn standard single material response -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416 type 2 cl 3 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-01-274-9809 MPN LS15262V3-6Machine Screw
- 5305-01-398-6338 MPN 03A098-12D37PClose Tolerance Screw
- 5306-01-010-2346 MPN GB511GF6-17Shear Bolt
- 5306-01-170-3460 MPN BACB30NE4036Shear Bolt
- 5306-01-203-2824 MPN 69-63788-602Bolt
- 5306-01-223-7118 MPN BACB30NF7-12Shear Bolt
- 5306-01-331-1269 MPN VAL23602-8D015Close Tolerance Bolt
- 5306-01-358-3560 MPN VCG0006-08-34Machine Bolt
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-140-7286 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
BACB30LH4-7 | The Boeing Company |
BACB30LH4-7 | Sps Technologies, Llc |
BACB30LH4-7 | Valley-todeco, Inc. |
BACB30LH4-7 | Federal Manufacturing Corporation |
BACB30LH4-7 | Sps Technologies, Llc |
BACB30LH4-7 | Sps Technologies, Llc |
BACB30LH4-7 | Huck International, Inc. |
BACB30LH4-7 | Voi-shan/chatsworth |
BACB30LH4-7 | Huck Intl Inc |