NSN 5305-01-146-6141
High Torque Screw
Between 0.613 inches and 0.643 inches fastener length, flat countersunk head style, between 0.497 inches and 0.507 inches head diameter, grip diameter: between 0.2490 inches and 0.2495 inches .
Manufacturer part number HT4049-4-5 for national stock number 5305011466141.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-146-6141.
-
MPN or Model
HT4049-4-5
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.2 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.291 inches and 0.341 inches -
Fastener Length
Between 0.613 inches and 0.643 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.497 inches and 0.507 inches -
Grip Diameter
Between 0.2490 inches and 0.2495 inches -
Internal Drive Style
High-torque -
Thread Diameter
0.250 inches -
Grip Length
Between 0.302 inches and 0.322 inches -
Thready Qty Per Inch (tpi)
28 -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Surface Finish
32.0 microinches threads -
Material
Steel comp xm-13 -
Material Specification
Ams 5629 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-01-417-2492 MPN 3M1169V3-6AClose Tolerance Screw
- 5305-01-435-3461 MPN BACB30LU7-23Close Tolerance Screw
- 5305-01-512-8411 MPN 3M1170D3-5AFClose Tolerance Screw
- 5306-00-143-1377 MPN 594383Machine Bolt
- 5306-00-533-8232 MPN VEH160271-4M24Close Tolerance Bolt
- 5306-00-723-3895 MPN VAL21013-12090Shear Bolt
- 5306-01-004-9527 MPN VAL23029-8D29Close Tolerance Bolt
- 5306-01-054-4598 MPN BACB30NE3D5Shear Bolt
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-146-6141 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
HT4049-4-5 | Huck International, Inc. |
HT4049-4-5 | Arconic Global Fasteners & Rings, |
ST3M714-4-5 | Boeing Company, The |
ST3M714-4-5 | Sps Technologies, Llc |
ST3M714-4-5 | Alcoa Global Fasteners, Inc. |
HT4049-4-5 | Hi-shear Corporation |
HT4049-4-5 | Sps Technologies, Llc |
HT4049-4-5 | Lisi Aerospace Canada Corp |
HT4049-4-5 | Huck Intl Inc |
10115431 | Nimikkeistokeskus Ncb Finland |
HT4049-4-5 | Alcoa Global Fasteners, Inc. |
HT4049-4-5 | Sps Technologies, Llc |
ST3M714-4-5 | Valley-todeco, Inc. |
ST3M714-4-5 | Heartland Precision Fasteners, Inc. |
ST3M714-4-5 | Fastener Innovation Technology, Inc. |
HT4049-4-5 | Sps Technologies, Llc |
ST3M714-4-5 | Houston Precision Fasteners I, Lp |
HT4049-4-5 | Sps Technologies, Llc |
WC4049-4-5 | West Coast Aerospace Inc |
HT4049-4-5 | Sps Technologies Ltd Tj Brooks |