NSN 5305-01-148-2654
High Torque Screw
Between 1.573 inches and 1.603 inches fastener length, flat countersunk head style, between 0.328 inches and 0.337 inches head diameter, grip diameter: between 0.1625 inches and 0.1635 inches .
Manufacturer part number NAS1202-21 for national stock number 5305011482654.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-148-2654.
-
MPN or Model
NAS1202-21
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.251 inches and 0.301 inches -
Fastener Length
Between 1.573 inches and 1.603 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.328 inches and 0.337 inches -
Grip Diameter
Between 0.1625 inches and 0.1635 inches -
Internal Drive Style
Cross recess type 1 -
Thread Diameter
0.164 inches -
Grip Length
Between 1.302 inches and 1.322 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Hardness Rating
36.0 rockwell c and 40.0 rockwell c -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Material
Steel comp e4340 or steel comp 4140 or steel comp 8740 or steel comp 8735 or steel comp 6150 -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416 type 2 cl 2 federal specification single treatment response -
Thread Series Designator
Unjc -
Specification Data
80205-nas1202 professional/industrial association standard
More from these suppliers
- 5305-01-085-3877 MPN NAS1189302P6KSocket Head Cap Screw
- 5305-00-008-5884 MPN NAS1101E08-9Machine Screw
- 5305-00-205-3674 MPN NAS1189E06P4LSocket Head Cap Screw
- 5305-00-316-8124 MPN NAS1101E04H6Machine Screw
- 5305-00-754-2071 MPN NAS1203-9Close Tolerance Screw
- 5305-00-889-2960 MPN NAS1190-04P5LSocket Head Cap Screw
- 5305-01-140-0586 MPN NAS1189E3T12LKMachine Screw
- 5305-01-004-8712 MPN NAS1189-4P7LSocket Head Cap Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-148-2654 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1202-21 | Eriks Southwest Inc |
NAS1202-21 | Apcom Inc |
NAS1202-21 | Nor-cal Supply Co.inc. |
NAS1202-21 | National Aerospace Standards |
NAS1202-21 | Hi-shear Corporation |
NAS1202-21 | Sps Technologies, Llc |
NAS1202-21 | Lisi Aerospace Canada Corp |
NAS1202-21 | Sps Technologies, Llc |
NAS1202-21 | Lawrence Engineering And Supply Inc |
NAS1202-21 | Collins Engineering Corp |
NAS1202-21 | Durham Aircraft Service Inc |
NAS1202-21 | Air Industries Co Inc |