NSN 5305-01-187-5957
High Torque Screw
Between 0.686 inches and 0.716 inches fastener length, flat countersunk head style, between 0.455 inches and 0.510 inches head diameter, grip diameter: between 0.2485 inches and 0.2495 inches .
Manufacturer part number BACB30LH4-5 for national stock number 5305011875957.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-187-5957.
-
MPN or Model
BACB30LH4-5
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.364 inches and 0.414 inches -
Fastener Length
Between 0.686 inches and 0.716 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.455 inches and 0.510 inches -
Grip Diameter
Between 0.2485 inches and 0.2495 inches -
Internal Drive Style
Cross recess type 1 -
Thread Diameter
0.250 inches -
Grip Length
Between 0.302 inches and 0.322 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
95000 pounds per square inch -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Surface Finish
32.0 microinches threads -
Material
Iron alloy 660 -
Material Specification
Ams 5731 assn standard single material response -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416 type 2 cl 2 federal specification single treatment response -
Thread Series Designator
Unf
More from these suppliers
- 5305-01-105-1143 MPN 3M926-4L11Close Tolerance Screw
- 5305-01-336-3216 MPN VCL0008-3D6PClose Tolerance Screw
- 5305-01-435-6292 MPN BACB30LU9-18Close Tolerance Screw
- 5305-01-591-0047 MPN ST3M557-421Close Tolerance Screw
- 5305-01-600-8172 MPN PMT8704A12Close Tolerance Screw
- 5306-00-075-3241 MPN VFK100G-07032Shear Bolt
- 5306-00-470-8728 MPN VAL23602-6DS020Close Tolerance Bolt
- 5306-01-045-2429 MPN VAL23608-4-26Shoulder Bolt
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-187-5957 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
BACB30LH4-5 | The Boeing Company |
BACB30LH4-5 | Valley-todeco, Inc. |
BACB30LH4-5 | Sps Technologies, Llc |
BACB30LH4-5 | Arconic Global Fasteners & Rings, |
BACB30LH4-5 | Federal Manufacturing Corporation |
BACB30LH4-5 | Sps Technologies, Llc |
BACB30LH4-5 | Huck International, Inc. |
BACB30LH4-5 | Arconic Global Fasteners & Rings, |
BACB30LH4-5 | Sps Technologies, Llc |
BACB30LH4-5 | Voi-shan/chatsworth |
BACB30LH4-5 | Huck Intl Inc |
BACB30LH4-5 | Sps Technologies, Llc |
BACB30LH4-5 | Alcoa Global Fasteners, Inc. |
Stock Check
- NS: 575
- NE: 2821
- SV: 2
- OH: 1