NSN 5305-01-234-2563
High Torque Screw
Between 0.941 inches and 0.971 inches fastener length, flat countersunk head style, between 0.339 inches and 0.381 inches head diameter, grip diameter: between 0.1890 inches and 0.1895 inches .
Manufacturer part number LD111-0044-2310 for national stock number 5305012342563.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-234-2563.
-
MPN or Model
LD111-0044-2310
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.306 inches and 0.356 inches -
Fastener Length
Between 0.941 inches and 0.971 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.339 inches and 0.381 inches -
Grip Diameter
Between 0.1890 inches and 0.1895 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.190 inches -
Grip Length
Between 0.615 inches and 0.635 inches -
Thready Qty Per Inch (tpi)
32 -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Material
Steel comp xm-13 -
Material Specification
Ams 5629 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-508-5088 MPN LS15267V3-36Machine Screw
- 5305-01-234-1661 MPN BACB30LU04-4Close Tolerance Screw
- 5305-01-338-4061 MPN BACB30NT3R14Close Tolerance Screw
- 5305-01-512-8294 MPN 3M1170D6-16AClose Tolerance Screw
- 5306-00-097-4662 MPN MS21250-05036Shear Bolt
- 5306-00-701-0313 MPN 384522Shoulder Bolt
- 5306-01-043-0554 MPN BACB30NF6-29Close Tolerance Bolt
- 5306-01-054-3404 MPN VCG0009L6-11Shear Bolt
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-234-2563 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
LD111-0044-2310 | Boeing Company, The |
LD111-0044-2310 | Sps Technologies, Llc |
LD111-0044-2310 | Valley-todeco, Inc. |
LD111-0044-2310 | J.w. Manufacturing, Inc |
LD111-0044-2310 | Sps Technologies, Llc |
LD111-0044-2310 | Sps Technologies, Llc |
LD111-0044-2310 | Sonic Industries Inc. |
LD111-0044-2310 | Hi-shear Corporation |
LD111-0044-2310 | Sps Technologies, Llc |
LD111-0044-2310 | Lisi Aerospace Canada Corp |
Stock Check
- NS: 39
- NE: 66