NSN 5305-01-259-7002
High Torque Screw
Between 0.558 inches and 0.588 inches fastener length, flat countersunk head style, between 0.325 inches and 0.385 inches head diameter, grip diameter: between 0.2041 inches and 0.2051 inches .
Manufacturer part number H044-3-4R for national stock number 5305012597002.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-259-7002.
-
MPN or Model
H044-3-4R
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.323 inches -
Fastener Length
Between 0.558 inches and 0.588 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.325 inches and 0.385 inches -
Grip Diameter
Between 0.2041 inches and 0.2051 inches -
Single Shear Strength
132000 pounds per square inch -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.190 inches -
Grip Length
Between 0.240 inches and 0.260 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
220000 pounds per square inch -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Material
Steel comp h11 -
Material Specification
Ams6487 assn standard single material response -
Surface Treatment
Cadmium -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-840-5962 MPN 965336-1Externally Relieved Body Screw
- 5305-01-025-6408 MPN AIC812-02-7Machine Screw
- 5305-01-046-3341 MPN HT4010-5-5Shoulder Screw
- 5305-01-052-9817 MPN AIC986-10-28Close Tolerance Screw
- 5305-01-076-4889 MPN NAS1101-08-26Machine Screw
- 5305-01-104-1066 MPN HT4068-3-8AClose Tolerance Screw
- 5305-01-216-6614 MPN LE111-0041-2409Close Tolerance Screw
- 5305-01-327-9690 MPN AIC1652-4-13AClose Tolerance Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-259-7002 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
H044-3-4R | Huck International, Inc. |
AIC984-3-4R | Sps Technologies, Llc |
VT1693F34-R | Alcoa Global Fasteners, Inc. |
C7984-3-4R | Sps Technologies, Llc |
C7984-3-4R | Sps Technologies, Llc |
C7984-3-4R | Lockheed Martin Corporation |
H044-3-4R | Huck Intl Inc |
AIC984-3-4PR | Sps Technologies, Llc |
Stock Check
- NE: 18
- NS: 2344