NSN 5305-01-270-8514
High Torque Screw
Between 0.986 inches and 1.016 inches fastener length, flat countersunk head style, between 0.429 inches and 0.479 inches head diameter, grip diameter: between 0.3110 inches and 0.3120 inches .
Manufacturer part number 121558-5-A8B for national stock number 5305012708514.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-270-8514.
-
MPN or Model
121558-5-A8B
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.501 inches -
Fastener Length
Between 0.986 inches and 1.016 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.429 inches and 0.479 inches -
Grip Diameter
Between 0.3110 inches and 0.3120 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.312 inches -
Grip Length
0.050 inches -
Features Provided
Dry film lubricant -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
220000 pounds per square inch -
Hardness Rating
46.0 rockwell c and 50.0 rockwell c -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Surface Finish
32.0 microinches threads -
Material
Steel comp h11 -
Material Specification
Ams 6487 assn standard single material response -
Surface Treatment
Aluminum and chromate -
Surface Treatment Specification
Mil-c-83488 type 2 cl 3 military specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-080-0183 MPN 3MA334CFA7Machine Screw
- 5305-00-100-6866 MPN AIC812-04-8Machine Screw
- 5305-00-450-5963 MPN AIC1023V5-18Close Tolerance Screw
- 5305-01-009-6705 MPN A1C82-4-9Close Tolerance Screw
- 5305-01-054-6237 MPN AIC9535-6-21Close Tolerance Screw
- 5305-01-054-6267 MPN AIC985-4-14PClose Tolerance Screw
- 5305-01-063-8483 MPN NAS1101-3-27Machine Screw
- 5305-01-090-6335 MPN BACB30LR3-17Close Tolerance Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-270-8514 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
121558-5-A8B | Sps Technologies, Llc |
AIC985B5-8 | Sps Technologies, Llc |
C7985B5-8 | Lockheed Martin Corporation |
VT1694W5-8 | Arconic Global Fasteners & Rings, |
PBF1166B5-8 | Sps Technologies, Llc |
VT1694W5-8 | Alcoa Global Fasteners, Inc. |
121558-5-A8B | Sps Technologies, Llc |
H185B5-8 | Huck International, Inc. |
H185B5-8 | Huck Intl Inc |