NSN 5305-01-288-7851
High Torque Screw
Between 2.332 inches and 2.382 inches fastener length, flush head style, between 0.615 inches and 0.898 inches head diameter, head height: 0.195 inches .
Manufacturer part number C9535-7-27 for national stock number 5305012887851.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-288-7851.
-
MPN or Model
C9535-7-27
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.668 inches and 0.698 inches -
Fastener Length
Between 2.332 inches and 2.382 inches -
Head Style
Flush -
Head Diameter
Between 0.615 inches and 0.898 inches -
Head Height
0.195 inches -
Grip Diameter
Between 0.4360 inches and 0.4370 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.438 inches -
Grip Length
Between 1.664 inches and 1.684 inches -
Thready Qty Per Inch (tpi)
20 -
Surface Finish
32.0 microinches threads -
Material
Steel comp h11 -
Material Specification
Ams 6487 assn standard single material response -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416 type 2 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-01-106-3860 MPN HT4068-5-10AClose Tolerance Screw
- 5305-01-168-9201 MPN LD111-0047-0303Close Tolerance Screw
- 5305-01-198-6507 MPN AIC811-06-18Socket Head Cap Screw
- 5305-01-212-2202 MPN AIC4038-06-02Machine Screw
- 5305-01-259-7002 MPN AIC984-3-4PRClose Tolerance Screw
- 5305-01-296-1675 MPN AIC618-5-4Machine Screw
- 5305-01-303-5636 MPN AIC939-3-14Close Tolerance Screw
- 5305-01-420-6750 MPN BACS12GU3K12DMachine Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-288-7851 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
C9535-7-27 | Lockheed Martin Corporation |
VT1696-7-27 | Alcoa Global Fasteners, Inc. |
AIC9535-7-27 | Sps Technologies, Llc |
121754-7-27 | Sps Technologies, Llc |
VT1696-7-27 | Arconic Global Fasteners & Rings, |
PBF1198-7-27 | Sps Technologies, Llc |
121754-7-27 | Sps Technologies, Llc |
SC1776-7-27 | Arconic Global Fasteners & Rings, |
SF120-7-27 | Saturn Fasteners Inc |