NSN 5305-01-297-4084
High Torque Screw
Between 0.870 inches and 0.900 inches fastener length, flat countersunk head style, between 0.325 inches and 0.385 inches head diameter, grip diameter: between 0.1885 inches and 0.1895 inches .
Manufacturer part number AIC984B3-9 for national stock number 5305012974084.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-297-4084.
-
MPN or Model
AIC984B3-9
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.298 inches and 0.348 inches -
Fastener Length
Between 0.870 inches and 0.900 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.325 inches and 0.385 inches -
Grip Diameter
Between 0.1885 inches and 0.1895 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.190 inches -
Grip Length
Between 0.552 inches and 0.572 inches -
Features Provided
Dry film lubricant -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
220000 pounds per square inch -
Hardness Rating
46.0 rockwell c and 50.0 rockwell c -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Material
Steel comp h11 -
Material Specification
Ams 6487 assn standard single material response -
Surface Treatment
Aluminum and chromate -
Surface Treatment Specification
Mil-c-83488 type 2 cl 3 military specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-903-2197 MPN AIC813-06-R34Machine Screw
- 5305-01-303-5634 MPN 3M1034C4-10-21Close Tolerance Screw
- 5305-01-416-5354 MPN AIC1591-4-11Close Tolerance Screw
- 5305-01-417-2492 MPN TX1026V3-6AClose Tolerance Screw
- 5305-01-462-2737 MPN TX1026V5-11AClose Tolerance Screw
- 5305-01-513-8895 MPN TX1026D4-15AClose Tolerance Screw
- 5305-01-622-0182 MPN 120-225C08T27Close Tolerance Screw
- 5305-01-646-1354 MPN JSFB12V02-19Machine Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-297-4084 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
AIC984B3-9 | Sps Technologies, Llc |
C7984B3-9 | Lockheed Martin Corporation |
C7984B3-9 | Alcoa Global Fasteners, Inc. |
VT1693AS3-9 | Arconic Global Fasteners & Rings, |
PBF1165B3-9 | Sps Technologies, Llc |
121557-3-9B | Sps Technologies, Llc |
H044B3-9 | Huck International, Inc. |
H044B3-9 | Huck Intl Inc |
VT1693AS3-9 | Alcoa Global Fasteners, Inc. |