NSN 5305-01-314-9101
High Torque Screw
Between 0.620 inches and 0.650 inches fastener length, flat countersunk head style, between 0.325 inches and 0.385 inches head diameter, grip diameter: between 0.1885 inches and 0.1895 inches .
Manufacturer part number PBF1165-3-5 for national stock number 5305013149101.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-314-9101.
-
MPN or Model
PBF1165-3-5
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.298 inches and 0.348 inches -
Fastener Length
Between 0.620 inches and 0.650 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.325 inches and 0.385 inches -
Grip Diameter
Between 0.1885 inches and 0.1895 inches -
Single Shear Strength
132000 pounds per square inch -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.190 inches -
Grip Length
Between 0.302 inches and 0.322 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
220000 pounds per square inch -
Hardness Rating
46.0 rockwell c and 50.0 rockwell c -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Surface Finish
32.0 microinches threads -
Material
Steel comp h11 -
Material Specification
Ams 6487 assn standard single material response -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416 type 2, cl 2 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-262-3240 MPN AIC813-06R7Machine Screw
- 5305-00-469-5396 MPN AIC792-4-25Close Tolerance Screw
- 5305-00-840-5962 MPN 965336-1Externally Relieved Body Screw
- 5305-01-095-4605 MPN AIC812-08-5Machine Screw
- 5305-01-105-1809 MPN 3M925C4-9DClose Tolerance Screw
- 5305-01-111-4129 MPN AIC813-06R4Machine Screw
- 5305-01-124-5766 MPN AIC812-04-20Machine Screw
- 5305-01-381-1483 MPN 1701-3-15Close Tolerance Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-314-9101 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
PBF1165-3-5 | Sps Technologies, Llc |
AIC984-3-5 | Sps Technologies, Llc |
C7984-3-5 | Lockheed Martin Corporation |
C7984-3-5 | Sps Technologies, Llc |
C7984-3-5 | Arconic Global Fasteners & Rings, |
C7984-3-5 | Huck International, Inc. |
C7984-3-5 | Sps Technologies, Llc |
C7984-3-5 | Sps Technologies, Llc |
C7984-3-5 | Sps Technologies, Llc |
C7984-3-5 | Alcoa Global Fasteners, Inc. |