NSN 5305-01-362-4456
High Torque Screw
Between 1.751 inches and 1.781 inches fastener length, flat countersunk head style, between 0.510 inches and 0.564 inches head diameter, grip diameter: between 0.3740 inches and 0.3745 inches .
Manufacturer part number LD111-0047-0620 for national stock number 5305013624456.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-362-4456.
-
MPN or Model
LD111-0047-0620
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.516 inches -
Fastener Length
Between 1.751 inches and 1.781 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.510 inches and 0.564 inches -
Grip Diameter
Between 0.3740 inches and 0.3745 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.375 inches -
Grip Length
1.250 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
125000 pounds per square inch -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Material
Steel comp xm-13 -
Material Specification
Ams 5629 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-778-2648 MPN NAS1102-08-4Machine Screw
- 5305-00-809-0693 MPN 51B333-14Close Tolerance Screw
- 5305-00-880-9828 MPN A0IC876-3-8Close Tolerance Screw
- 5305-01-243-9341 MPN SM-C-800983-28Socket Head Cap Screw
- 5305-01-381-2351 MPN AIC818-08-103CSocket Head Cap Screw
- 5305-01-418-9857 MPN TX1027D3-2AFClose Tolerance Screw
- 5305-01-435-5829 MPN BACB30LU8-54Close Tolerance Screw
- 5305-01-462-2753 MPN TX1027D3-8AClose Tolerance Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-362-4456 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
LD111-0047-0620 | Sps Technologies, Llc |
LD111-0047-0620 | Huck International, Inc. |
LD111-0047-0620 | Sps Technologies, Llc |
LD111-0047-0620 | Arconic Global Fasteners & Rings, |
LD111-0047-0620 | Hi-shear Corporation |
LD111-0047-0620 | Sps Technologies, Llc |
LD111-004-0620 | Sonic Industries Inc. |
LD111-0047-0620 | Lisi Aerospace Canada Corp |
LD111-0047-0620 | Boeing Company, The |