NSN 5305-01-369-5510
High Torque Screw
Between 2.098 inches and 2.128 inches fastener length, flat countersunk undercut head style, 0.381 inches head diameter, head height: 0.083 inches .
Manufacturer part number NAS1580A3R28 for national stock number 5305013695510.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-369-5510.
-
MPN or Model
NAS1580A3R28
-
Schedule B
7616.10.6000 (Threaded fasteners of aluminum) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.363 inches -
Fastener Length
Between 2.098 inches and 2.128 inches -
Head Style
Flat countersunk undercut -
Head Diameter
0.381 inches -
Head Height
0.083 inches -
Grip Diameter
Between 0.1885 inches and 0.1895 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.190 inches -
Grip Length
Between 1.740 inches and 1.760 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Material
Aluminum alloy -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416 type 2 federal specification all treatment responses -
Thread Series Designator
Unjf -
Specification Data
80205-nas1580 professional/industrial association standard
More from these suppliers
- 1680-00-614-0313 MPN NAS25-3RTrunnion Tank Strap
- 5935-00-111-1892 MPN NAS1665-16Electrical Connector Backshell
- 5940-01-437-8564 MPN NAS1063A2-107CYTerminal Board Marker Strip
- 5305-00-008-9118 MPN NAS1190C04T8LSocket Head Cap Screw
- 5305-00-068-5398 MPN MS24673-1Socket Head Cap Screw
- 5305-00-104-2813 MPN NAS1352-8LE36PSocket Head Cap Screw
- 5305-00-164-1363 MPN NAS2810-22Close Tolerance Screw
- 5305-00-173-8055 MPN NAS1146-4Close Tolerance Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-369-5510 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1580A3R28 | National Aerospace Standards |