NSN 5305-01-387-3755
High Torque Screw
Between 4.501 inches and 4.531 inches fastener length, flat countersunk head style, 0.704 inches head diameter, grip diameter: between 0.3735 inches and 0.3745 inches .
Manufacturer part number AIC1651-6-63 for national stock number 5305013873755.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-387-3755.
-
MPN or Model
AIC1651-6-63
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
096640 - Screws, Iron Or Steel -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.578 inches -
Fastener Length
Between 4.501 inches and 4.531 inches -
Head Style
Flat countersunk -
Head Diameter
0.704 inches -
Grip Diameter
Between 0.3735 inches and 0.3745 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.375 inches -
Grip Length
Between 3.928 inches and 3.948 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
125000 pounds per square inch -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Material
Iron alloy 660 -
Material Specification
Ams 5737 assn standard single material response or ams 5731 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-061-2380 MPN 811C00-5Machine Screw
- 5305-00-144-9753 MPN NAS1101E08-7Machine Screw
- 5305-00-151-5750 MPN NAS1101C06-14BMachine Screw
- 5305-00-815-3715 MPN NAS1102-04-4Machine Screw
- 5305-01-050-9002 MPN AIC984-7-16Close Tolerance Screw
- 5305-01-188-9641 MPN HT4027-3-2Close Tolerance Screw
- 5305-01-218-5774 MPN AIC4043-06-12Machine Screw
- 5305-01-284-8380 MPN AIC618-5-26Close Tolerance Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-387-3755 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
AIC1651-6-63 | Sps Technologies, Llc |
E008-6-63 | Huck International, Inc. |
PBF1416-6-63 | Sps Technologies, Llc |
BF0015HC3-6-63 | Lfc Industries Inc. |
HR239-6-63 | Hi-shear Corporation |
HR239-6-63 | Lisi Aerospace Canada Corp |
E008-6-63 | Huck Intl Inc |
SC3103-6-63 | Arconic Global Fasteners & Rings, |
SLB216-6-63 | Space-lok, Inc. |
03A173-6-63 | Northrop Grumman Systems Corporation |
123742-6-63 | Sps Technologies, Llc |
03A173-6-63 | Northrop Grumman Systems Corporation |