NSN 5305-01-392-3413
High Torque Screw
Between 1.441 inches and 1.471 inches fastener length, flat countersunk head style, between 0.573 inches and 0.635 inches head diameter, grip diameter: between 0.3110 inches and 0.3120 inches .
Manufacturer part number PBF1570-5-14 for national stock number 5305013923413.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-392-3413.
-
MPN or Model
PBF1570-5-14
-
Schedule B
8105.90.0000 (Cobalt, wrought, and articles thereof) -
NMF (National Motor Freight)
096640 - Screws, Iron Or Steel -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.582 inches -
Fastener Length
Between 1.441 inches and 1.471 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.573 inches and 0.635 inches -
Grip Diameter
Between 0.3110 inches and 0.3120 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.312 inches -
Grip Length
Between 0.864 inches and 0.884 inches -
Thready Qty Per Inch (tpi)
24 -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Material
Cobalt comp mp-35-n -
Material Specification
Ams 5844 assn standard single material response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-025-4069 MPN 51B600C06-14BMachine Screw
- 5305-00-310-6021 MPN PBF1068-106CMachine Screw
- 5305-01-056-1513 MPN BACB30LU4-35Close Tolerance Screw
- 5305-01-056-4414 MPN PBF1165-3-16Close Tolerance Screw
- 5305-01-197-9427 MPN PBF1202-5-15Close Tolerance Screw
- 5305-01-386-2556 MPN PBF1203-3-9Machine Screw
- 5305-01-435-3878 MPN BACB30LU7-39Close Tolerance Screw
- 5305-01-500-8237 MPN TX1026C4-11AClose Tolerance Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-392-3413 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
PBF1570-5-14 | Sps Technologies, Llc |
125300-5-14 | Sps Technologies, Llc |
HR257-5-14 | Hi-shear Corporation |
03A415-5-14 | Northrop Grumman Systems Corporation |
HR257-5-14 | Lisi Aerospace Canada Corp |